A flaw was found in udisks2. A local attacker with an active console session can exploit insufficient authorization checking on the 'as-user' option in the org.freedesktop.UDisks2.Filesystem.Mount() D-Bus method. This allows the attacker to spoof the 'as-user' parameter, mounting filesystems on behalf of arbitrary users, including privileged accounts. This can lead to local privilege escalation through mount point injection and manipulation of the mount namespace visible to privileged users.

The IPv6 Neighbor Discovery handlers in subsys/net/ip/ipv6_nbr.c (handle_ra_input, handle_ns_input, handle_na_input) used an incorrect boolean expression that combined the RFC 4861 validity checks with the ICMPv6 code check using the wrong operator precedence: the form was ((length/hop/source/target checks) && (icmp_hdr->code != 0)). Because every legitimate ND message carries ICMPv6 code 0, an attacker setting code == 0 (the normal value) caused the entire predicate to evaluate false, so the packet was never dropped and all of the other checks were silently skipped. The bypassed checks include the mandatory Hop Limit == 255 verification (which proves an ND packet originated on-link and was not forwarded) and, for Router Advertisements, the requirement that the source be a link-local address, as well as multicast-target sanity checks. As a result, an adjacent on-link attacker — and, because the Hop-Limit-255 guard is bypassed, potentially a remote/off-link attacker whose packets would otherwise be rejected — can have forged Router Advertisement, Neighbor Solicitation, and Neighbor Advertisement messages accepted. A forged RA lets the attacker reconfigure the victim's default router, on-link prefixes (SLAAC), MTU, reachable/retransmit timers, and (with CONFIG_NET_IPV6_RA_RDNSS) DNS servers, while forged NS/NA enable neighbor-cache poisoning, enabling man-in-the-middle, traffic redirection, and denial of service. The flaw is an input-validation/authentication weakness rather than a memory-safety issue: the underlying packet-parsing primitives (net_pkt_get_data, net_pkt_read, net_pkt_skip) are independently bounds-safe and the validated length is the true buffer length, so skipping the length check causes no out-of-bounds access. The defect has existed since the logic was introduced in 2018 and shipped in all releases through v4.4.0; it is fixed by splitting the condition so any failing check drops the packet.

A maliciously crafted BMP file, when parsed through certain Autodesk products, can force a Untrusted Pointer Dereference vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process.

A maliciously crafted TIF file, when parsed through certain Autodesk products during image import, can cause an Out-of-Bounds Read in the image handling library. A malicious actor can leverage this vulnerability to cause a denial of service

PILOS (Platform for Interactive Live-Online Seminars) is a frontend for BigBlueButton. From 2.1.0 until 4.14.1, PILOS does not send a Cross-Origin-Opener-Policy response header, so pages opened by PILOS via a link that opens a new browsing context (e.g., target="_blank") retain a window.opener reference back to the originating PILOS tab. A malicious destination page reached this way can use window.opener to navigate or manipulate the original PILOS tab, a technique known as reverse tabnabbing, potentially redirecting an authenticated user to a phishing page that mimics PILOS. This issue is fixed in version 4.14.1.

h2 is a pure-Python implementation of a HTTP/2 protocol stack. Versions up to and including 4.4.0 accept request header blocks containing more than one Host header, and forward every Host header to the consuming application. Where the consumer downgrades HTTP/2 to HTTP/1.1, the resulting request carries two Host header lines, providing a request smuggling primitive. This issue is fixed in version 4.4.1.

node-re2 provides RE2 regular expression bindings for Node.js. Prior to version 1.26.1, passing a Buffer whose final bytes form a truncated (incomplete) multi-byte UTF-8 sequence could cause the native binding to read past the end of the allocated buffer while attempting to decode the final, incomplete code point. This could result in an out-of-bounds read and potential disclosure of adjacent memory contents. This issue is fixed in version 1.26.1.

jsoup is a Java library for working with real-world HTML. From 1.14.3 until 1.23.1, jsoup's HTML parser could incorrectly handle a malformed tag name ending in a control character, causing the tag to acquire the parsing behavior of a different element. When a custom Safelist permits certain raw-text elements, this misparsing can cause content that should remain inert text to be emitted as active markup after serialization, potentially resulting in cross-site scripting. jsoup's built-in Safelists are not affected. This issue is fixed in version 1.23.1.

league/commonmark is a PHP library for parsing and rendering CommonMark Markdown. From 0.6.0 until 2.9.0, specially crafted Markdown lines can cause the parser to have quadratic time complexity when converting, because several parsing paths repeatedly rescan growing portions of a line to translate between character positions and byte positions, and the Autolink extension can also copy and validate the remaining line at every URL-like prefix, allowing an attacker who can submit Markdown for conversion to consume disproportionate CPU time with a comparatively small request. This issue is fixed in 2.9.0.

league/commonmark is a PHP library for parsing and rendering CommonMark Markdown. From 1.5.0 until 2.9.0, the AttributesExtension's href and src unsafe-link filter can be bypassed by embedding control bytes, such as a tab, carriage return, line feed, or leading C0 control character, in a javascript: URL that browsers discard before parsing the scheme, causing the browser to still execute the script even when the unsafe-link filter is enabled. This issue is fixed in 2.9.0.

Nx is a monorepo solution for TypeScript and polyglot codebases. From version 20.8.0 until 22.7.7 and 23.0.2, the Nx self-hosted HTTP remote cache extracts downloaded cache artifacts without constraining where files are written. A malicious or on-path (MITM) remote cache server can return a crafted tar archive whose entries escape the cache directory and write to arbitrary locations on the machine running Nx, which can be escalated to remote code execution. Nx's default local cache and Nx Cloud are not affected; only workspaces configured to use a self-hosted remote cache are affected. This issue is fixed in versions 22.7.7 and 23.0.2.

AIL Project contains a stored cross-site scripting vulnerability in the translation controls displayed for chat messages and forum posts. The affected templates inserted message and post identifiers directly into inline JavaScript onclick handlers: onclick="translateMessageToPreferredLanguage('{{ message['id'] }}', '{{ mess_id_escape }}', this)" and: onclick="translatePostToPreferredLanguage('{{ post['id'] }}', '{{ post_id_escape }}', this)" These values were HTML-template escaped but were not safely encoded for use as JavaScript string literals inside an HTML attribute. A specially crafted identifier containing quotation marks, escape characters, or other JavaScript syntax could therefore terminate the expected string argument and inject arbitrary JavaScript into the event handler. Because the affected values are associated with indexed chat messages or forum posts, a malicious value may remain stored by AIL and be rendered whenever an analyst accesses the corresponding chat or forum explorer view. Successful exploitation requires the victim to click the affected Translate to preferred language button. The injected code would then execute in the victim’s browser under the security origin of the AIL instance.

AIL Framework contains a stored cross-site scripting vulnerability in the crawler domain view. Crawled URLs were embedded directly into the JavaScript onclick handler used to display a stored screenshot, without context-appropriate encoding. An attacker who can cause a specially crafted URL to be recorded in the crawler history can inject JavaScript syntax into the stored URL value. The payload remains stored by AIL and is subsequently included in the domain view. When an authenticated analyst clicks the screenshot icon associated with the malicious URL, the injected JavaScript executes in the analyst’s browser within the security context of the AIL Framework application. Successful exploitation could allow an attacker to access information available to the analyst’s session, modify displayed content, or perform application actions using the analyst’s privileges. Exploitation requires the victim to interact with the affected screenshot entry. The vulnerability was corrected by serializing the crawled URL with Jinja’s tojson filter before inserting it into the JavaScript handler. This safely escapes characters that could otherwise terminate the JavaScript string and introduce executable code.

AIL Framework contained a reflected cross-site scripting vulnerability in the /tag/add_tags endpoint. When an error occurred while processing a tag operation, the application returned the error value directly as an HTML response using str(res[0]). If attacker-controlled input was included in the generated error message, a crafted request could cause arbitrary HTML or JavaScript to be reflected in the response without appropriate output encoding. An attacker could exploit the vulnerability by convincing an authenticated AIL Framework user to open a specially crafted link. Successful exploitation could allow JavaScript to execute in the victim’s browser within the security context of the AIL Framework application. Depending on the victim’s privileges and the application’s protections, the attacker could perform actions using the victim’s session, access information available to the victim, or modify data through authenticated application requests. The vulnerability requires user interaction because the authenticated victim must follow or open the crafted request. The attacker does not necessarily require an AIL Framework account, provided that the crafted request can be delivered to an already authenticated user.

Mermaid is a JavaScript tool that uses Markdown-inspired text to create and modify diagrams and charts. From version 11.6.0 until 11.16.1, Mermaid Radar Diagrams allow arbitrary large values for the ticks parameter, which can cause high CPU usage and freeze the rendering webpage or JavaScript process for long periods of time, potentially until the process is killed from memory exhaustion. This issue is fixed in version 11.16.1.

Mermaid is a JavaScript tool that uses Markdown-inspired text to create and modify diagrams and charts. Prior to 10.9.8 and 11.16.1, Mermaid's configuration setters (mermaid.initialize, mermaidAPI.setConfig, and mermaidAPI.updateSiteConfig) merge caller-supplied configuration into Mermaid's internal config using the assignWithDepth deep-merge helper, which is vulnerable to prototype pollution. This is only exploitable if an application forwards untrusted data directly into one of these configuration entry points, which is outside their documented usage; diagram-supplied configuration (e.g. %%{init: {}}%% or YAML frontmatter) is not affected. This issue is fixed in versions 10.9.8 and 11.16.1.

Mermaid is a JavaScript tool that uses Markdown-inspired text to create and modify diagrams and charts. From version 11.5.0 until 11.16.1, Mermaid Architecture Diagrams are vulnerable to prototype pollution when a diagram defines a group with an id of __proto__. Because the group id is used directly as an object property key without validation, an attacker who can supply diagram text can pollute Object.prototype, potentially affecting the behavior of the embedding application. This issue is fixed in version 11.16.1.

Mermaid is a JavaScript tool that uses Markdown-inspired text to create and modify diagrams and charts. From version 10.6.0 until 10.9.8 and 11.16.1, Mermaid XY Charts are vulnerable to an infinite loop denial of service in the setXAxisRangeData function when configuring an X-Axis with invalid parameters. Because each loop iteration appends an element to an array, this generally causes a RangeError to appear after a few seconds, but it may instead cause the page or JavaScript process to crash from memory exhaustion, depending on the environment. This issue is fixed in versions 10.9.8 and 11.16.1.

Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.74.3 and 6.24.2, the default ("automagic") form notification email rendered user-submitted values without escaping, allowing an unauthenticated form submitter to inject HTML into the notification emails sent to the configured recipients. This issue is fixed in versions 5.74.3 and 6.24.2.

Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.74.3 and 6.24.2, public frontend forms did not enforce the file upload restrictions that the Control Panel enforces, so an unauthenticated visitor could upload file types an administrator had intended to disallow through a form's assets or files field, and for assets fields, files could be stored on a public, web-accessible disk, though the application's global upload allowlist still blocked executable types such as .php and .html. This issue is fixed in versions 5.74.3 and 6.24.2.

LangGraph Checkpoint Postgres and SQLite Checkpoint are the Postgres and SQLite implementations of LangGraph's checkpoint saver. Prior to 3.1.1, the langgraph-checkpoint-postgres and langgraph-checkpoint-sqlite packages persisted hierarchical namespaces as a dot joined string and scoped reads by matching that string as a simple prefix pattern, so a read scoped to one namespace could also match a sibling namespace whose flattened form shares the same leading characters, or a namespace label containing unescaped pattern metacharacters, allowing an authenticated caller to retrieve stored items belonging to another tenant or user through an ordinary scoped search or list namespaces call, with no crafted input required. This issue is fixed in versions 3.1.1 of langgraph-checkpoint-postgres and langgraph-checkpoint-sqlite.

node-re2 provides RE2 regular expression bindings for Node.js. Prior to version 1.25.1, the WrappedRE2::Replace function built its replacement result and passed it to V8 using ToLocalChecked without checking for the empty MaybeLocal that V8 returns when the resulting string or buffer exceeds V8's maximum string length. When a global replace uses an output amplifying replacement template, the result can grow quadratically with the input size, and once the result exceeds V8's maximum string length, the unchecked ToLocalChecked call causes a fatal, uncatchable process abort instead of a catchable exception. This issue is fixed in version 1.25.1.

Traefik is an open source HTTP reverse proxy and load balancer. From 3.0.0 until 3.6.25 and 3.7.10, Traefik's Kubernetes Gateway API provider in pkg/provider/kubernetes/gateway/httproute.go, grpcroute.go, tcproute.go, and tlsroute.go builds HTTPRoute, GRPCRoute, TCPRoute, and TLSRoute router and service identities by hyphen-concatenating namespace, route name, Gateway identity, entry point, and rule index, allowing colliding Routes to overwrite another namespace's backend. This issue is fixed in 3.6.25 and 3.7.10.

Traefik is an open source HTTP reverse proxy and load balancer. From 3.6.11 until 3.6.25 and 3.7.10, Traefik's BasicAuth middleware in pkg/middlewares/auth/basic_auth.go deduplicates concurrent password checks with a singleflight key built from the delimiter-free concatenation of password and secret, allowing an attacker who has a valid credential and the stored hash to authenticate as an unconfigured username when headerField trusts the forwarded identity. This issue is fixed in 3.6.25 and 3.7.10.

Traefik is an open-source edge router that makes publishing services a fun and easy experience. Prior to 2.11.54, 3.6.25, and 3.7.10, cross-namespace @kubernetescrd references are not rejected for TraefikService backend references resolved by the service resolver. A tenant confined by RBAC to a single namespace can therefore bind its own router to a TraefikService owned by another namespace and expose or reroute that namespace's backend, defeating the namespace isolation allowCrossNamespace=false is meant to enforce. This issue is fixed in version 2.11.54, 3.6.25, 3.7.10.

Traefik is an open source HTTP reverse proxy and load balancer. Prior to 2.11.53, 3.6.24, and 3.7.9, Traefik's default HTTP reverse proxy forwards a plain HTTP/2 or HTTP/3 CONNECT request and its body to an HTTP/1.1 upstream through a shared net/http.Transport. When the upstream answers the CONNECT with a keep-alive non-2xx response and does not drain the body, Traefik returns the desynchronized backend socket to its shared pool and reuses it for other clients. An unauthenticated attacker can use this behavior to make a different client read the attacker's smuggled response, which can include authenticated or private content from another request. The ForwardAuth middleware with forwardBody true and preserveRequestMethod true can re-issue a CONNECT with the buffered body attached, exposing the auth-client pool to the same desynchronization. This issue is fixed in 2.11.53, 3.6.24, and 3.7.9.

Nuxt is an open-source web development framework for Vue.js. From 4.4.0 until 4.5.1, runtime cache:nuxt:payload entries for /<page>/_payload.json can be returned before route middleware and page guards because import.meta.prerender is not enforced, disclosing another user's SSR data. This issue is fixed in 4.5.1.

rclone is a command-line program to sync files and directories to and from different cloud storage providers. Prior to 1.75.0, a valid but nondefault FTP filename encoding in backend/ftp/ftp.go can restore raw CR/LF immediately before an attacker-controlled path is interpolated into the line-oriented FTP control channel, and github.com/jlaffaye/ftp formats the argument through textproto.Conn.Cmd without rejecting CR or LF, allowing a filename such as victim CRLF DELE other-secret CRLF NOOP to inject an independent authenticated FTP command when the victim copies or syncs to a more-privileged FTP destination. This issue is fixed in 1.75.0.

llama.cpp builds b1886 through b7445 contain a race condition use-after-free vulnerability in the LLaMA-Android JNI wrapper where bench_1model() and free_1context() lack synchronization, allowing Thread A to operate on freed memory while Thread B concurrently frees the llama_context. Attackers can exploit this by performing heap spray with attacker-controlled data containing a fake vtable to hijack the vtable pointer at offset +0x30, causing llama_batch_allocr::clear() to dereference arbitrary memory and achieve remote code execution.

llama.cpp builds b1886 through b7445 contain a null pointer dereference vulnerability in the LLaMA-Android JNI wrapper where the bench_1model() function fails to validate the model context pointer before dereferencing it. Attackers can supply a malicious, corrupt, or truncated model file to trigger a null context condition, causing a SIGSEGV crash that terminates the Android application process and results in denial of service.

llama.cpp builds b1886 through b7445 contain an integer overflow vulnerability in the LLaMA-Android JNI wrapper where the new_1batch() function multiplies sizeof(llama_seq_id) by an attacker-controlled n_seq_max parameter without overflow validation, causing heap buffer allocation to wrap and allocate insufficient memory. Attackers can exploit this by providing a crafted n_seq_max value through a malicious model file or JNI call to trigger heap corruption and achieve denial of service or arbitrary code execution on Android applications using the LLaMA-Android binding.

LightFTP through 2.4 contains multiple data race vulnerabilities in ftpserv.c that allow anonymous attackers to cause undefined behavior by issuing LIST followed by ABOR commands without authentication. The control thread closes data_socket and file_fd descriptors while worker threads concurrently operate on the same fields in worker_thread_cleanup, allowing stale file descriptors to be reassigned by the OS and subsequently used by worker threads on unrelated resources, resulting in potential denial of service.

Flowise through 3.1.4 contains an authentication bypass vulnerability that allows unauthenticated attackers to access the OAuth2 credential refresh endpoint by exploiting prefix-based whitelist matching in the authentication middleware defined in packages/server/src/utils/constants.ts. Attackers can send a POST request to the oauth2-credential refresh route with a trailing credential identifier to bypass all authentication and authorization checks, triggering unauthorized OAuth token rotation against credentials belonging to any workspace and potentially disrupting dependent OAuth integrations. This is a bypass of CVE-2026-41273.

TimescaleDB through 2.29.1, fixed in commit 517c13e, contains an out-of-bounds read vulnerability that allows authenticated attackers to cause query-result integrity failures or backend crashes by supplying a crafted Simple8b selector-11 value, which is stored in the signed int16 Arrow dictionary-index type and bypasses index validation checks in bulk text dictionary decompression. Attackers with direct DML access to a non-frozen physical compressed hypertable relation can trigger an out-of-bounds read before the base of the live offsets array through the VectorAgg single-text hashing strategy, resulting in incorrect aggregation output, backend SIGSEGV, or PostgreSQL crash recovery depending on build configuration.

TimescaleDB through 2.29.1, fixed in commit 517c13e, contains an out-of-bounds read vulnerability in the Gorilla compression reverse row iterator that allows authenticated attackers to cause a denial of service by storing a crafted compressed datum with an internally inconsistent BitArray. Attackers with DML access to a compressed hypertable can trigger an unsigned integer wraparound in the reverse iterator bucket index computation, causing a read beyond the end of the bucket array, resulting in a SIGSEGV crash that can be repeatedly triggered on each subsequent reverse-order scan.

FFmpeg versions from 4.4 up to, but not including, 9.0 contain an out-of-bounds heap write vulnerability in the native GoPro CineForm HD (CFHD) decoder that allows remote attackers to corrupt heap memory by supplying a crafted AVI file during stream probing. The cfhd_decode() function fails to enforce the non-Bayer logical output-width invariant in the transform-type-2 reconstruction path, causing horiz_filter_clip() to write oversized 16-bit sample rows far beyond the allocated output frame buffer, which can be escalated to arbitrary code execution via overwrite of a live cleanup callback pointer.

FFmpeg versions from 0.5 up to, but not including, 9.0 contain an uninitialized heap memory disclosure vulnerability in the native TIFF decoder in libavcodec/tiff.c. An attacker who can cause FFmpeg to decode a crafted TIFF file can supply a valid Deflate-compressed strip that terminates successfully after producing fewer bytes than the declared strip requires. The tiff_unpack_zlib() function allocates a heap buffer sized for the full declared strip but copies all declared rows via memcpy() regardless of how many bytes zlib actually decompressed, causing unwritten bytes that can contain stale data from prior heap allocations to be incorporated into decoded image output and potentially exposing sensitive data in persistent services.

FFmpeg versions from 3.0 up to, but not including, 9.0 contain an uninitialized heap memory read vulnerability in the native Screenpresso decoder (libavcodec/screenpresso.c) that allows attackers to recover sensitive memory contents by supplying a crafted SPV1 packet with a valid zlib stream that decompresses fewer bytes than the full frame requires. The screenpresso_decode_frame() function fails to validate the produced byte count before calling av_image_copy_plane() to copy the complete frame dimensions from the persistent ctx->inflated_buf buffer, causing unwritten heap memory from prior allocations or prior frames to be copied into decoded output and potentially exposing sensitive data such as userspace addresses from persistent decoding services.

FFmpeg versions from 3.0 up to, but not including, 9.0 contain an uninitialized heap memory read vulnerability in the native RSCC decoder (libavcodec/rscc.c) that allows attackers to disclose heap memory contents by supplying a crafted video file with a compressed tile that decompresses fewer bytes than the declared tile geometry requires. When rscc_decode_frame() calls av_image_copy_plane() without validating the decompressed byte count against the tile dimensions, the unwritten suffix of the persistent intermediate buffer ctx->inflated_buf is copied into the decoded frame, potentially exposing data from prior heap allocations or previous decoded frames in persistent decoding services.

FFmpeg versions from 0.5 up to, but not including, 9.0 contain a signed integer overflow vulnerability in the DVB subtitle parser in libavcodec/dvbsub_parser.c that allows attackers to trigger a heap buffer overflow by supplying a crafted WTV file. The overflow causes the bounds-check guard expression to wrap to INT_MIN, bypassing the PARSE_BUF_SIZE comparison and invoking memcpy() with attacker-controlled data into a heap buffer, resulting in an out-of-bounds heap write and potential memory corruption or code execution.

Spacebar Server before commit dcfd910 contains a missing authorization vulnerability that allows any authenticated attacker to add themselves to arbitrary group DM channels by sending a PUT request to the channels recipient endpoint without membership verification. Attackers can exploit the unguarded PUT /channels/{channel_id}/recipients/{user_id} handler to join private group DMs, read complete message history, post messages as a participant, and force-add third-party users without their consent.

boringproxy through 0.10.0 contains a resource exhaustion vulnerability that allows any authenticated user to permanently exhaust server file descriptors, goroutines, and memory by sending requests to the GET /loading endpoint with attacker-supplied id query parameter values. Because the handler performs no map-lookup validity check and receives on a nil channel that blocks forever, with no timeout, no context cancellation, and no server-side reclamation due to absent HTTP server timeouts, each malicious request permanently holds one goroutine, one file descriptor, and approximately 50 kB of memory until the server's file descriptor limit is reached and listener Accept calls fail, halting all tunnel traffic forwarding for all users.

boringproxy through 0.10.0 contains a newline injection vulnerability that allows authenticated low-privileged users with tunnel-creation permission to inject arbitrary lines into the server account's SSH authorized_keys file by supplying a percent-encoded newline character in the domain parameter of the tunnel creation endpoint. Attackers can insert an unrestricted public key entry into authorized_keys to gain persistent shell access, and subsequently read cleartext credentials from the database file including all user tokens, tunnel private keys, and TLS certificates.

Dinky's SysConfigController.getAll() handler for GET /api/sysConfig/getAll carries a method-level @SaIgnore annotation that short-circuits the class-level @SaCheckLogin, so the Sa-Token interceptor lets the request through with no session or role check. Any remote unauthenticated caller who can reach the Dinky HTTP port (8888 by default) receives the full live system configuration (54 entries on a stock v1.2.5 install) with one parameterless GET. Only one credential field (sys.maven.settings.repositoryPassword) has a desensitization handler wired; the other credential-bearing fields (sys.env.settings.dinkyToken, sys.ldap.settings.userPassword, sys.resource.settings.oss.accessKey and secretKey, and sys.dolphinscheduler.settings.token) return in cleartext. A bare install leaks the shipped defaults, including the hardcoded dinkyToken efda1551-7958-4e0f-80a8-dfd107df3e38 and minioadmin/minioadmin OSS keys; once an operator configures LDAP, object storage, or DolphinScheduler through the Settings Center, those live third-party credentials leak from the same endpoint. Because dinkyToken is the sole gate on the sibling POST /download/uploadFromRsByLocal arbitrary file write, this disclosure defeats token rotation as a mitigation for that vulnerability. Affects Dinky v1.2.5 (the current release, 2025-11-05) and the development branch (dev HEAD 63b5a5a), where the affected code is byte-identical.

Dinky's POST /download/uploadFromRsByLocal handler passes the caller-supplied path parameter directly to new File(path) and file.transferTo(dest) with no path validation. The route is marked @SaIgnore and /download/** is excluded from the Sa-Token interceptor, so the only guard is a header equality check against a dinkyToken value whose default (efda1551-7958-4e0f-80a8-dfd107df3e38) is hardcoded in source and shipped to every deployment. Anyone who can reach Dinky's HTTP port (8888 by default) and supplies the hardcoded token can write arbitrary files as the Dinky service account. The default Docker image runs on 8888 with no proxy or authentication and chmod 777 on /opt/dinky, so the application's own classpath, launch scripts, and static assets are writable. Demonstrated impact: overwriting /opt/dinky/config/static/index.html served attacker JavaScript to admin browsers immediately, and writing /opt/dinky/org/dinky/Dinky.class executed attacker code as the Dinky service account at the next JVM start via a classpath-shadow launched by script/bin/auto.sh. Writes are uid 9999 (flink), not root, so /etc, /root, /home, and /usr are refused. Affects Dinky v1.2.5 (the current release) and the development branch, where the code is byte-identical.

diboot-core's POST /common/load-related-data endpoint resolves caller-supplied field names to any @TableField column of any entity and returns those values for all rows, with no field or entity allowlist. The only guard, relatedDataSecurityCheck(), returns true unconditionally, so any authenticated user (including a zero-role account) can read @JsonIgnore-annotated secret fields such as IamAccount.authSecret and IamAccount.secretSalt for every account, or arbitrary secret fields of any other entity. Shiro's two-iteration MD5 with an 8-character salt is trivially crackable offline, so the disclosed admin password hashes convert to full administrative takeover. The endpoint is not example code; the official diboot-admin-ui frontend requires it, so deployments following the vendor's recommended integration expose it. The mechanism was renamed relatedData* to attachMore* on the development branch, but attachMoreSecurityCheck() also returns true unconditionally.

The Sendmachine for WordPress plugin for WordPress is vulnerable to authorization bypass via the 'manage_admin_requests' function in all versions up to, and including, 1.0.20. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to overwrite the plugin's SMTP configuration, which can be leveraged to intercept all outbound emails from the site (including password reset emails).