In Eclipse Milo versions 0.6.0 through 1.1.4, UASC server transport handlers fail to release retained partial message chunks when a channel disconnects, allowing a remote unauthenticated client to exhaust pooled direct memory by repeatedly sending incomplete chunks and disconnecting, potentially terminating the server.

Improper Input Validation vulnerability in Apache ActiveMQ AMQP, Apache ActiveMQ, Apache ActiveMQ All. A remote unauthenticated peer that can reach an exposed AMQP NIO connector can trigger denial-of-service behavior by sending a frame size value. This cause the NIO threads to die and if done rapidly enough can lead to exhaustion of the NIO thread pool denying service to other connections. This issue affects Apache ActiveMQ AMQP: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ All: before 5.19.9, from 6.0.0 before 6.2.8. Users are recommended to upgrade to version 5.19.9, 6.2.8, or 6.3.0 which fixes the issue.

Improper Authorization vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ All, Apache ActiveMQ. An authenticated low-privilege user can bypass a per-destination write ACL by sending to an ActiveMQ temporary composite destination whose physical name is a comma-separated composite of real queues. This allows publishing messages to any of the destinations in the list without proper write ACL permissions because the authorization check is bypassed due to the composite destination being marked as temporary. This issue affects Apache ActiveMQ Broker: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ All: before 5.19.9, from 6.0.0 before 6.2.8; Apache ActiveMQ: before 5.19.9, from 6.0.0 before 6.2.8. Users are recommended to upgrade to version 5.19.9, 6.2.8 or 6.3.0, which fixes the issue.

Uncontrolled Resource Consumption vulnerability in Apache Tomcat's WebSocket chat example. This issue affects Apache Tomcat: from 11.0.0-M20 through 11.0.24, from 10.1.24 through 10.1.57, from 9.0.89 through 9.0.120. Users who have followed the security guidance to remove the examples web application are not affected by this issue. Users are recommended to remove the examples web application or to upgrade to version 11.0.25, 10.1.58 or 9.0.121 (when released), which fix the issue.

Deserialization of Untrusted Data (CWE-502) in the Tribes-based clustering component  in Apache Software Foundation Apache Axis2/Java through 2.0.0 on Apache Tomcat  (only when Tribes clustering is enabled, which is off by default) allows an  unauthenticated remote attacker with network access to the clustering port to  execute arbitrary code via a crafted serialized Java object delivered to the cluster  channel and deserialized in  org.apache.axis2.clustering.tribes.Axis2ChannelListener#messageReceived. Users are  recommended to upgrade to version 2.0.1, which fixes this issue by removing the  clustering feature entirely.

prealloc_elems_and_freelist in kernel/bpf/stackmap.c in the Linux kernel before 5.14.12 allows unprivileged users to trigger an eBPF multiplication integer overflow with a resultant out-of-bounds write.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache Wicket. This issue affects Apache Wicket: from 9.0.0 through 9.23.0, from 10.0.0 through 10.9.0. Users are recommended to upgrade to version 10.10.0, which fixes the issue.

In the IPv6 implementation in the Linux kernel before 5.13.3, net/ipv6/output_core.c has an information leak because of certain use of a hash table which, although big, doesn't properly consider that IPv6-based attackers can typically choose among many IPv6 source addresses.

Use of Insufficiently Random Values, Protection Mechanism Failure vulnerability in Apache Wicket. This issue affects Apache Wicket: from 9.0.0 through 9.23.0, from 10.0.0 through 10.9.0. Users are recommended to upgrade to version 10.10.0, which fixes the issue.

Joomla Extension - rolandd.com - XSS vectors in AJAX endpoint handlers RO CSVI < 9.11.0

Joomla Extension - rolandd.com - CSRF vectors in AJAX endpoint handlers RO CSVI < 9.11.0

Joomla Extension - rolandd.com - Unauthenticated directory creation RO CSVI < 9.11.0

Joomla Extension - balbooa.com - Authenticated arbitrary file upload in Gridbox < 2.20.2 - File upload methods allows authenticated attackers to upload arbitrary files. Turns into an authenticated RCE if combined with CVE-2026-65884 as the required account can be created by the attacker.

Joomla Extension - balbooa.com - Privilege Escalation in Gridbox < 2.20.2 - The registration method allows users provided usergroup IDs, allowing unauthenticated actors to register new accounts with administrative permissions.

Joomla Extension - aimy-extensions.com - RCE via PHP object injection in Aimy Captcha-Less Form Guard 18.0 - 20.0 - A forged clfgd field allows PHP objection injection and thereby remote code execution.

The FAB auth manager's Azure AD OAuth login defaulted `verify_signature=False` when decoding the ID token, so an attacker able to present a forged or unsigned (`alg:none`) ID token to the OAuth callback could bypass authentication and log in as an arbitrary user, including one holding the Admin role (CWE-347). Deployments running the FAB auth manager with the Azure AD OAuth login path under its default configuration are affected; the Authentik path already defaulted to `True`. This issue affects `apache-airflow-providers-fab` before 3.7.3. Users are advised to upgrade to `apache-airflow-providers-fab` 3.7.3, which defaults `verify_signature=True`.

Description: Missing Authorization in Apache Atlas. A missing authorization vulnerability in Apache Atlas's admin endpoints allows any authenticated user, regardless of their assigned role, to perform administrative operations. Affect Version: This issue affects Apache Atlas: from 0.8 through 2.5.0. Mitigation: Users are recommended to upgrade to version 2.6.0, which fixes the issue.

Kyuubi Engine UI proxy accepts a host and port from the request path and proxies HTTP requests to that destination. A remote requester with network access to the proxy can cause the Kyuubi server to send HTTP requests to arbitrary reachable hosts, resulting in SSRF or open-proxy behavior. This issue affects Apache Kyuubi: from 1.8.0 before 1.12.0. Users are recommended to upgrade to version 1.12.0, which disables the proxy by default. To restore proxied Engine UI, set kyuubi.frontend.rest.engine.ui.proxy.enabled=true and configure allowed target hosts with kyuubi.frontend.rest.engine.ui.proxy.hosts.

Improper Input Validation vulnerability in Apache Traffic Server. This issue affects Apache Traffic Server: from 9.2.0 through 9.2.14, from 10.1.0 through 10.1.3. Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fixes the issue.

The Linux kernel before 5.11.14 has a use-after-free in cipso_v4_genopt in net/ipv4/cipso_ipv4.c because the CIPSO and CALIPSO refcounting for the DOI definitions is mishandled, aka CID-ad5d07f4a9cd. This leads to writing an arbitrary value.

A random memory access flaw was found in the Linux kernel's GPU i915 kernel driver functionality in the way a user may run malicious code on the GPU. This flaw allows a local user to crash the system or escalate their privileges on the system.

A flaw was found in Keycloak, an open-source identity and access management solution. When a user account is temporarily locked due to repeated failed login attempts, an attacker with valid client credentials can exploit the Client-Initiated Backchannel Authentication (CIBA) flow to bypass this brute-force protection. This allows continued authentication attempts and token issuance even when the account should be locked, potentially enabling further unauthorized access attempts.

A flaw was found in Keycloak. When a JSON Web Encryption (JWE) encrypted request object is submitted, Keycloak may incorrectly process unsigned claims if the decrypted content is raw JSON, bypassing the configured signature policy. This allows a remote attacker to submit unauthorized claims, leading to a compromise of data integrity within the OpenID Connect (OIDC) authorization flow. While a redirect URI allowlist acts as a compensating control, this vulnerability violates OIDC Core and Financial-grade API (FAPI) signing requirements.

A flaw was found in Keycloak, an open-source identity and access management solution. When a client application is configured to accept broad redirect Uniform Resource Identifiers (URIs), a remote attacker can manipulate the authentication process by crafting a special web address. If a user clicks this link, the client application might incorrectly prioritize attacker-controlled information over legitimate data. This vulnerability, known as HTTP parameter pollution, could allow an attacker to bypass security measures or gain unauthorized access to resources.

An issue was discovered in aspeed_lpc_ctrl_mmap in drivers/soc/aspeed/aspeed-lpc-ctrl.c in the Linux kernel before 5.14.6. Local attackers able to access the Aspeed LPC control interface could overwrite memory in the kernel and potentially execute privileges, aka CID-b49a0e69a7b1. This occurs because a certain comparison uses values that are not memory sizes.

A use-after-free exists in drivers/tee/tee_shm.c in the TEE subsystem in the Linux kernel through 5.15.11. This occurs because of a race condition in tee_shm_get_from_id during an attempt to free a shared memory object.

In kernel/bpf/hashtab.c in the Linux kernel through 5.13.8, there is an integer overflow and out-of-bounds write when many elements are placed in a single bucket. NOTE: exploitation might be impractical without the CAP_SYS_ADMIN capability.

Jenkins Multijob Plugin 669.v9d96a_d9c71b_0 and earlier provides Groovy scripting features that do not integrate with Script Security Plugin, allowing attackers with Item/Create or Item/Configure permission to execute arbitrary code in the context of the Jenkins controller JVM.

IBM Langflow OSS 1.0.0 through 1.10.3 could allow a remote attacker to inject arbitrary code on the system, due to the improper control of user input code.

IBM Langflow OSS 1.0.0 through 1.10.3, 1.0.0 through 1.10.3, 1.0.0 through 1.10.3, 1.0.0 through 1.10.3, 1.0.0 through 1.10.3, and 1.0.0 through 1.10.3 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot " sequences ( /.. /) to v i ew arbitrary files on the system.

A flaw has been found in H3C NX15 V100R017. The impacted element is the function esps.ipv6.wan of the file /api/esps. Executing a manipulation of the argument workMode can lead to command injection. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure.

Jenkins 2.575 and earlier, LTS 2.568.1 and earlier improperly identifies file paths attempting path traversal in file parameter names, allowing attackers with Item/Configure and Item/Build permission to write files to arbitrary locations on the controller file system.

IBM Langflow OSS 1.0.0 through 1.10.3 does not properly validate the username field, allowing attackers to inject path traversal sequences and bypass containment checks. This enables multiple severe impacts, including arbitrary directory deletion, cross-tenant data destruction, and JWT signing key deletion leading to session invalidation.

IBM Langflow OSS 1.0.0 through 1.10.3, and 1.0.0 through 1.10.3 contains a Server-Side Request Forgery (SSRF) vulnerability in the validate_model_provider_key() function for the Ollama provider. The function accepts a user-supplied OLLAMA_BASE_URL parameter and passes it directly to requests.get() without validation, scheme/host allowlisting, or filtering of private IP ranges (loopback, RFC1918, link-local addresses).

IBM Langflow OSS 1.0.0 through 1.10.3 contain an authentication bypass vulnerability in the Model Context Protocol (MCP) composer endpoint when mcp_composer_enabled=true (default) and projects are configured with auth_type=oauth .

IBM Langflow OSS 1.0.0 through 1.10.3 Langflow could allow server-side request forgery (SSRF) due to incomplete and ineffective SSRF protection enforcement.

In OpenStack Ironic through 38.0.0, a project reader that makes a crafted request to Ironic can return Portgroups assigned to Nodes owned or leased by another project.

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 39.8.9, 40.9.2, 41.2.1, and 42.0.0-beta.3, the DevTools reveal in file manager action could launch the target file rather than reveal it. An attacker with a separate means of running script inside the DevTools frontend, such as a malicious DevTools extension, could use showItemInFolder handling to execute native code outside the sandbox when DevTools is opened for windows exposed to untrusted content or untrusted DevTools extensions. This issue is fixed in 39.8.9, 40.9.2, 41.2.1, and 42.0.0-beta.3.

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 39.8.9, 40.9.2, 41.2.2, and 42.0.0-beta.4, objects copied across the contextBridge boundary from untrusted content could carry an attacker-influenced prototype, enabling prototype-pollution-style attacks against preload code despite context isolation being enabled. Apps are only affected if their preload code accepts object arguments from untrusted content and reads properties from them without own-property checks, while apps that only accept primitive arguments or validate object arguments are not affected. This issue is fixed in 39.8.9, 40.9.2, 41.2.2, and 42.0.0-beta.4.

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 39.8.7, 40.9.0, 41.2.0, and 42.0.0-beta.1, the mode option of webContents.openDevTools() was not sanitized before use by the DevTools frontend. If an attacker can influence this value, script under their control may run in the DevTools context, which in unsandboxed configurations has access to Node.js, including when untrusted input reaches the mode argument of openDevTools() or untrusted content calls openDevTools() on a webview it embeds. This issue is fixed in 39.8.7, 40.9.0, 41.2.0, and 42.0.0-beta.1.

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 40.10.6, 41.9.1, 42.5.1, and 43.0.0, when a custom protocol handler returned a ProtocolResponse with a url and no session, Electron made the upstream request through defaultSession instead of the session that handled the protocol. A cached response could then be reused across otherwise isolated session partitions. Apps that use ProtocolResponse.url, omit ProtocolResponse.session, and rely on separate sessions to isolate content are affected. This issue is fixed in versions 40.10.6, 41.9.1, 42.5.1, and 43.0.0.

Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 39.8.9, 40.9.2, 41.2.2, and 42.0.0-beta.5, apps that expose Promise-returning functions to web content via contextBridge may be vulnerable to a context isolation bypass. Untrusted web content could obtain access to the isolated preload world and, through it, every capability the preload script has. In renderers without a sandbox, or with nodeIntegration enabled, this may escalate to Node.js access. Apps are affected if they expose Promise-returning functions via contextBridge, the standard pattern for wrapping ipcRenderer.invoke, in windows that load untrusted content. This issue is fixed in versions 39.8.9, 40.9.2, 41.2.2, and 42.0.0-beta.5.

Ghost is a Node.js content management system. From 4.9.0 until 6.54.1, an input validation issue allowed any staff user to create a post with content in feature_image_caption that could be used to hijack another staff user's Ghost Admin session, resulting in privilege escalation. This issue is fixed in 6.54.1.

Jenkins Ivy Report Plugin 1.2 and earlier does not configure its XML parser to prevent XML external entity (XXE) attacks when processing Ivy report files.

Missing permission checks in Jenkins AWS CodeBuild Plugin 0.59 and earlier allow attackers with Overall/Read permission to enumerate credentials IDs of credentials stored in Jenkins.

Missing permission checks in Jenkins CodeSonar Plugin 3.6.0 and earlier allow attackers with Overall/Read permission to enumerate credentials IDs of credentials stored in Jenkins.

Missing permission checks in Jenkins Sauce OnDemand Plugin 2.2.0 and earlier allow attackers with Overall/Read permission to enumerate credentials IDs of credentials stored in Jenkins.