A vulnerability was detected in TRENDnet TEW-657BRM 1.00.1. This issue affects some unknown processing of the file /usr/sbin/upgrade_flash.cgi. Performing a manipulation of the argument boundary results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor explains: ""I am not able to confirm if such vulnerability exists as the product has been EOL for more than 15 years. We will send out an announcement letting customers know."

A security vulnerability has been detected in TRENDnet TEW-657BRM 1.00.1. This vulnerability affects the function sprintf of the file /setup.cgi of the component mini_httpd. Such manipulation leads to out-of-bounds write. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor explains: ""I am not able to confirm if such vulnerability exists as the product has been EOL for more than 15 years. We will send out an announcement letting customers know." This vulnerability only affects products that are no longer supported by the maintainer.

Dancer versions before 1.3400 for Perl pass unvalidated session ids from the session cookie to the session engine. read_session_id returns the cookie value as the session id without checking its characters, and Dancer hands it to the session engine to load the session. A remote attacker may cause path traversal or injection in a session engine that uses the id in a file path, cache command or query without checking it.

GPAC through 26.07.0 contains a use-after-free vulnerability in gf_sg_proto_del() in src/scenegraph/vrml_proto.c because gf_sg_reset() frees unregistered prototypes still referenced by scene commands. Attackers can supply a crafted XMT/BT scene declaring prototypes via commands, processed by MP4Box -chap, to trigger freed memory access and crash the process.

GPAC through 26.07.0 contains a type confusion vulnerability in gf_sg_command_apply() in src/scenegraph/commands.c that fails to verify BIFS field-replace command types match target node fields. Attackers can supply a crafted XMT file opened with MP4Box, such as via chapter import, causing gf_sg_vrml_field_clone() to memcpy from invalid pointers and crash.

HTTP::Session versions before 0.43 for Perl allow memcached command injection via unfiltered session ids in HTTP::Session::Store::Memcached. The session id from the client's cookie reaches memcached unchanged as the cache key. A CR and LF in the session id end the cache command early, and the server reads the bytes after them as further commands.

In FRRouting, bgpd accepts a Tunnel Encapsulation attribute (type 23) whose outer TLV length does not match the length of the attribute: the mismatch is only logged and the attribute is processed anyway. A BGP neighbor can send UPDATE messages carrying such an attribute that put the reference count of the attribute's interned sub-TLV chain out of balance, so that the chain is freed while routes stored by bgpd (Adj-RIB-In entries and RIB paths) still point to it. When those routes are later replaced, withdrawn or cleared, for example when the session goes down, bgpd reads the freed memory, decrements a reference count inside it and frees it a second time. In the reporter's build without AddressSanitizer this ended in an assertion failure in bgpd's memory accounting, aborting bgpd and dropping all BGP sessions on the router, and the neighbor can repeat it each time bgpd restarts. Because freed heap memory is written to and freed again, consequences beyond a crash cannot be ruled out. An established BGP session is required. bgpd processes attribute 23 from every neighbor, including eBGP neighbors, unless it is explicitly discarded, although RFC 9012 requires it to be filtered on eBGP sessions by default. The issue was reproduced with "soft-reconfiguration inbound" configured for the neighbor, and the reporter observed that the crash does not occur on every attempt.

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in AyeCode Ltd GeoDirectory geodirectory allows Blind SQL Injection.This issue affects GeoDirectory: from n/a through 2.8.162.

Kroki before 0.36.0 contains a reflected cross-site scripting vulnerability in the /dbml/svg endpoint that allows unauthenticated attackers to inject javascript: hyperlinks by supplying crafted DBML table url, headercolor, or TableGroup color settings. Attackers can send a crafted SVG link that, when opened and the table header clicked, executes attacker JavaScript in the Kroki origin.

A vulnerability was found in sergix44 XBackBone up to 3.8.2. Impacted is the function MediaController::getRawById of the file app/Controllers/MediaController.php. The manipulation results in cross site scripting. It is possible to launch the attack remotely. The exploit has been made public and could be used. The pull request to fix this issue awaits acceptance.

Missing Authorization vulnerability in Amauri.IO WPMobile.App wpappninja allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WPMobile.App: from n/a through 11.86.

Enforce a recursion limit in Unmarshal to prevent stack exhaustion when parsing deeply-nested, recursive structures.

Decoding a maliciously-crafted MIME header containing many invalid encoded-words can consume excessive CPU.

A security vulnerability has been detected in sox_ng up to 14.8.1. Affected by this issue is the function read_samples_voc of the file src/voc.c of the component VOC Decoder. Such manipulation leads to out-of-bounds write. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The name of the patch is 0b40408b. A patch should be applied to remediate this issue. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

A weakness has been identified in Wuxi Wubang Security Software Wubang Five-in-One Safety Production Management Information System up to 3.5. Affected by this vulnerability is the function DiyFileUpload of the file /ws.asmx. This manipulation causes unrestricted upload. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Kingston FURY CTRL RGB Control Software up to 2.0.66.0. The impacted element is an unknown function in the library NTIOLib_X64.sys of the component IOCTL Handler. Performing a manipulation results in exposed ioctl with insufficient access control. The attack is only possible with local access.

A security vulnerability has been detected in Mereithhh VanBlog up to 0.54.0. This vulnerability affects the function fs.readFileSync of the file local.provider.ts of the component Custom Page Handler. The manipulation of the argument path leads to path traversal. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. Upgrading to version test-20261013 is able to resolve this issue. The identifier of the patch is d63aa163f10b6dc1080e2368fe8e71aa95b765cb. Upgrading the affected component is advised.

The BuddyForms plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'buddyforms_form_content' parameter in all versions up to, and including, 2.10.6 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is exploitable when a form configured with the public_submit option is published — a condition met by the plugin's bundled Post Simple template out of the box.

The Lightbox & Modal Popup WordPress Plugin – FooBox plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via the 'img alt attribute inside .wp-caption container' parameter in all versions up to, and including, 2.8.7 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is exploitable by Subscriber-level users when bbPress is installed, as its bbp_filter_kses filter chain permits img and pre tags while preserving numeric character references inside attribute values, allowing encoded payloads to bypass save-time sanitization and reach the vulnerable sink fully intact. Exploitation by attackers with subscriber-level access and above requires that bbPress 2.6.20 is installed, a public forum exists, and either the first topic has already been approved or subsequent topics clear moderation. On a default installation, where that is not configured, the vulnerability requires attackers with contributor-level access and above.

The Multi Step for Contact Form 7 plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'multipart field name (array key)' parameter in all versions up to, and including, 2.9.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires the target CF7 form to have the 'Save every step' option enabled and the Database for Contact Form 7 companion plugin to be active with its 'Expandable' table option enabled, both of which are disabled by default.

The FV Player 8 plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'fv_player_videos' parameter in all versions up to, and including, 8.1.9 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the administrator-controlled "Allow visitors to upload videos to their profile" setting to be enabled, without which the vulnerable save routine is inaccessible to Subscriber-level users.

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in StylemixThemes uListing ulisting allows Blind SQL Injection.This issue affects uListing: from n/a through 2.2.0.

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in BuddyBoss Buddyboss Platform buddyboss-platform allows Blind SQL Injection.This issue affects Buddyboss Platform: from n/a through 3.0.5.

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in INTINITUM FORM Transliterator serbian-transliteration allows Blind SQL Injection.This issue affects Transliterator: from n/a through 2.5.13.

A weakness has been identified in Mereithhh VanBlog up to 0.54.0. This affects an unknown part of the file packages/server/src/types/access/access.ts of the component Image Upload Endpoint. Executing a manipulation can lead to cross site scripting. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Tenda AC18 15.03.05.05_multi/15.03.05.19 Build 6318. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/upgrade of the component Firmware Upgrade Handler. Such manipulation of the argument upgradeFile leads to insufficient verification of data authenticity. The attack may be launched remotely. The exploit is publicly available and might be used.

In FRRouting, bgpd frees the same memory twice when dynamic BGP neighbors disconnect, if the peer-group used by a "bgp listen range" also has a Site-of-Origin configured ("neighbor PG soo"). Each dynamic neighbor shares the peer-group's SoO value instead of getting its own copy, but frees it as its own when the neighbor is deleted, which happens as soon as its connection closes. The first disconnect leaves the peer-group pointing at freed memory, and the second disconnect frees it again, causing bgpd to abort and drop all BGP sessions on the router. Any host whose address falls inside the listen range can trigger this by opening and closing two TCP connections to the BGP port, without sending any BGP message and without knowing the AS number, and can repeat it each time bgpd restarts. If the peer-group has a TCP-MD5 password, only hosts that know the password can trigger it. Two ordinary flaps of legitimate dynamic neighbors have the same effect. Between the two frees, displaying the configuration ("show running-config") or establishing a dynamic neighbor also reads the freed memory, which can crash bgpd after a single disconnect. Only configurations that combine a listen range with a SoO on the same peer-group are affected.

In FRRouting, bgpd does not correctly close a BGP session when the Send Hold Timer (RFC 9687) expires, i.e. when a neighbor has stopped accepting data from the router for twice the hold time. The connection is closed, but bgpd still considers the session to be up. A BGP neighbor that keeps sending KEEPALIVEs but stops reading from its connection, at a time when the router has a large amount of data to send to it (for example while sending it a full routing table), can trigger this. If the neighbor announced Graceful Restart support, bgpd crashes shortly after the session is closed, taking down all BGP sessions on the router, and the neighbor can repeat this each time bgpd restarts. Otherwise, the session stays stuck in the Established state: the neighbor's routes stay installed and keep being advertised to other peers, and the neighbor cannot reconnect until an operator clears the session manually. The neighbor does not need to be malicious; an overloaded or stuck peer can trigger the same behavior. No special configuration is required: any established BGP neighbor can trigger the issue, and Graceful Restart helper mode, which leads to the crash, is enabled by default.

RosarioSIS before 12.9 contains an improper authorization vulnerability that allows school-scoped administrators to assign fees and payments to students of other schools via MassAssignFees.php and MassAssignPayments.php. Attackers can substitute foreign student IDs in the student[] POST array of a modfunc=save request to alter other schools' student billing balances, breaking school isolation.

RosarioSIS before 12.9 contains a sql injection vulnerability that allows authenticated non-student users, including parents, to inject SQL via the unquoted period_id parameter in StudentSummary.php. Attackers can supply payloads without single quotes into IN() clauses to extract administrator password hashes and student records through time-based queries or modify data via stacked statements.

RosarioSIS before 12.9.1 contains a missing authorization vulnerability that allows authenticated teachers to write records for students outside their course period by supplying arbitrary student IDs. Attackers can modify the st_arr, values, or attendance POST arrays in MakeReferral.php, EnterEligibility.php, InputFinalGrades.php, and TakeAttendance.php to create referrals, eligibility codes, attendance and final grades for any student in the school.

Dolibarr ERP CRM before 24.0.0 contains an OS command injection vulnerability in htdocs/admin/tools/export.php that lets authenticated administrators bypass the restrict_os_commands allowlist. Attackers can submit a mysqldump value chaining commands with & characters around an allowlisted basename to execute operating system commands as the web server user.

Dolibarr ERP CRM 19.0.0 before 23.0.4 contains an SQL injection vulnerability that allows authenticated API users to inject SQL via the type field of the third-party bankaccounts REST endpoint. Attackers with only societe/creer permission can break out of the unescaped type value in CompanyBankAccount::create() to read password hashes and API keys via time-based blind subqueries.

RosarioSIS before 12.9.2 contains a reflected cross-site scripting vulnerability in modules/Food_Service/MenuReports.php that allows unauthenticated attackers to inject attributes via unescaped menu_id and modname parameters. Attackers can lure a logged-in administrator to a crafted Modules.php link whose double-quoted menu_id injects an onmouseover handler, stealing session and CSRF tokens to act as the administrator.

The Shipo plugin for WordPress is vulnerable to Authentication Bypass in versions 1.6 through 1.8.0. This is due to the `authenticate_rest_user()` function parsing the `LOGGED_IN_COOKIE` value and authenticating the named user without verifying the cookie's cryptographic signature. The function's intended `/wp-json/shipo/` route restriction can also be bypassed by placing that substring in the query string of an unrelated REST endpoint. This makes it possible for unauthenticated attackers who know an existing username to impersonate that user, including an administrator, and perform authorized actions through the REST API, including creating another administrator account.

The MemberDash plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 1.8.7. This is due to a mass-assignment vulnerability in the `user_account_manager()` function's edit_profile branch, where all submitted `$_POST` fields are iterated and directly assigned to the current member object via the `MS_Model` `__set()` magic method with no field allowlist and no capability or ownership check on the submitted `id` parameter. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject an arbitrary user ID via the `id` parameter — overwriting any WordPress user's email address and password, including the site administrator's — and subsequently use those modified credentials to gain full administrative access to the site.

Dokploy before 0.31.1 contains an OS command injection vulnerability in getComposeContainerCommand() that allows authenticated organization members to execute shell commands via the serviceName parameter. Attackers can store serviceName values with shell metacharacters through backup.create or backup.update tRPC procedures, executing commands as root when scheduled backups run and taking over the host via the mounted Docker socket.

Ettercap through 0.8.5.1 contains a heap out-of-bounds read vulnerability in dissector_mountd() in src/dissectors/ec_mountd.c that validates RPC credential and directory lengths independently rather than against the packet end. Network-adjacent attackers can send a crafted MOUNT MNT call to read up to 100 bytes past the heap buffer, leaking memory to the console and logs.

Ettercap through 0.8.5.1 contains a heap out-of-bounds read vulnerability in dissector_socks() in src/dissectors/ec_socks.c that allows network-adjacent attackers to read heap memory via unchecked SOCKS5 username/password lengths. Attackers can send a crafted SOCKS5 authentication packet observed by Ettercap to read up to 255 bytes past the heap buffer, disclosing memory printed and logged as captured credentials.

Axeloz Filesharing before 2.14.3 contains a stored cross-site scripting vulnerability that allows authenticated users to inject script by storing raw HTML or javascript: Markdown links in bundle descriptions. Recipients viewing the public bundle preview page execute the script via Alpine x-html, letting attackers steal the owner_token from localStorage and issue owner-scoped requests against victim bundles.

Frappe india-payroll before 16.0.4 contains a missing authorization vulnerability in the get_employee_details, compute_tax_comparison and set_tax_regime methods of tax_regime_selector.py that allows authenticated low-privileged users to access other employees' payroll data. Attackers can supply another employee identifier to read base pay and earning and deduction components, or change the tax regime on draft Salary Structure Assignments to affect tax withholding.

Pulse from 5.0.17 before 6.8.0 contains a missing authorization vulnerability in the /api/ai/approvals endpoints that allows authenticated viewer-level users to manage approval requests. Attackers can list pending requests to expose proposed commands and targets, and approve or deny other users' requests, altering decision and audit state.

A vulnerability was identified in CoolerMaster MASTERPLUS+ 1.9.6. This affects the function sub_11504 in the library WinRing0x64.sys of the component Device Driver. The manipulation of the argument PhysicalAddress leads to incorrect default permissions. The attack can only be performed from a local environment. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Opixido OCMS up to b7c15660aba83d96677c1a9abaa69c082a24f21c. This impacts an unknown function of the file admin/TUI/index.php of the component Admin TUI. This manipulation of the argument img causes cross site scripting. The attack can be initiated remotely. The exploit has been published and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way.

ByteStash 1.5.10 before 1.6.2 contains an insufficient session expiration vulnerability that allows holders of API keys to keep access after account deactivation because validateApiKey never checks account status. Attackers holding a deactivated account's API key can read, create, modify and delete its snippets via /api/snippets and use every MCP tool via /mcp.

The Cloud Storage Manager for Fluent Forms – Google Drive, Dropbox, OneDrive, S3 Uploads plugin for WordPress is vulnerable to Arbitrary File Write in all versions up to, and including, 1.2.0. This is due to missing authorization checks on the `connection/{driver}/save` and `/download/single-file` REST endpoints, combined with insufficient path validation in the Google Drive `downloadFile()` function, where the Google Drive metadata `name` value is concatenated into a local path without `basename()`, `sanitize_file_name()`, or canonical path validation. This makes it possible for unauthenticated attackers to store attacker-controlled Google Drive credentials, trigger a download of an attacker-owned file whose provider-returned filename contains path traversal, and write attacker-controlled content outside the intended `downloads` directory. When the written file has a PHP extension and lands in a web-accessible location, this can lead to remote code execution.

@kolkov/angular-editor before 3.0.3 contains a cross-site scripting vulnerability in refreshView() that writes HTML from ngModel or reactive form controls to innerHTML without DomSanitizer, bypassing the default sanitize option. Attackers can store HTML with event-handler attributes in content later loaded into the editor to execute script in the application's origin for users opening it.

@kolkov/angular-editor before 3.0.4 contains a cross-site scripting vulnerability in toggleEditorMode() that assigns source view text to innerHTML without DomSanitizer sanitization. Attackers can induce users to paste HTML with event handlers such as img onerror into source mode, executing script in the application's origin when toggling views.

Stored XSS via avatar upload chained with an authentication bypass in /Attachments leads to ATO in Cervantes version v1.3-beta could allow an attacker to execute arbitrary code in another user's browser with elevated privileges