CWE-789

If Apache HTTP Server 2.4.53 is configured to do transformations with mod_sed in contexts where the input to mod_sed may be very large, mod_sed may make excessively large memory allocations and trigger an abort.

Memory Allocation with Excessive Size Value vulnerability in Apache HTTP Server's mod_http leads to denial of service via malicious HTTP requests. This issue affects Apache HTTP Server: from 2.4.17 through 2.4.67.

Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ. During unmarshalling of OpenWire commands the size value of buffers was not properly validated which could lead to excessive memory allocation and be exploited to cause a denial of service (DoS) by depleting process memory, thereby affecting applications and services that rely on the availability of the ActiveMQ broker when not using mutual TLS connections. This issue affects Apache ActiveMQ: from 6.0.0 before 6.1.6, from 5.18.0 before 5.18.7, from 5.17.0 before 5.17.7, before 5.16.8. ActiveMQ 5.19.0 is not affected. Users are recommended to upgrade to version 6.1.6+, 5.19.0+, 5.18.7+, 5.17.7, or 5.16.8 or which fixes the issue. Existing users may implement mutual TLS to mitigate the risk on affected brokers.

In Eclipse Mosquitto 1.4.14, a user can shutdown the Mosquitto server simply by filling the RAM memory with a lot of connections with large payload. This can be done without authentications if occur in connection phase of MQTT protocol.

In Apache PDFBox, a carefully crafted PDF file can trigger an OutOfMemory-Exception while loading the file. This issue affects Apache PDFBox version 2.0.23 and prior 2.0.x versions.

A carefully crafted PDF file can trigger an OutOfMemory-Exception while loading the file. This issue affects Apache PDFBox version 2.0.22 and prior 2.0.x versions.

.NET, .NET Framework, and Visual Studio Denial of Service Vulnerability

In version from 3.0.0 to 3.5.3 of Eclipse Vert.x, the WebSocket HTTP upgrade implementation buffers the full http request before doing the handshake, holding the entire request body in memory. There should be a reasonnable limit (8192 bytes) above which the WebSocket gets an HTTP response with the 413 status code and the connection gets closed.

The Kubernetes API server component in versions prior to 1.15.9, 1.16.0-1.16.6, and 1.17.0-1.17.2 has been found to be vulnerable to a denial of service attack via successful API requests.

A flaw was found in undertow. Servlets annotated with @MultipartConfig may cause an OutOfMemoryError due to large multipart content. This may allow unauthorized users to cause remote Denial of Service (DoS) attack. If the server uses fileSizeThreshold to limit the file size, it's possible to bypass the limit by setting the file name in the request to null.

The Security component in Symfony 2.0.x before 2.0.25, 2.1.x before 2.1.13, 2.2.x before 2.2.9, and 2.3.x before 2.3.6 allows remote attackers to cause a denial of service (CPU consumption) via a long password that triggers an expensive hash computation, as demonstrated by a PBKDF2 computation, a similar issue to CVE-2013-5750.

In Eclipse Mosquitto 1.4.14, if a Mosquitto instance is set running with a configuration file, then sending a HUP signal to server triggers the configuration to be reloaded from disk. If there are lots of clients connected so that there are no more file descriptors/sockets available (default limit typically 1024 file descriptors on Linux), then opening the configuration file will fail.

An unauthenticated specially crafted packet sent by an attacker over the network will cause a denial-of-service (DoS) vulnerability. Vulnerability allows attacker to stop the PLC. After stopping (ERR LED flashing red), physical access to the PLC is required in order to restart the application. This issue affects: ABB AC500 V2 products with onboard Ethernet version 2.8.4 and prior versions.

An Uncontrolled Memory Allocation vulnerability leading to a Heap-based Buffer Overflow in the packet forwarding engine (PFE) of Juniper Networks Junos OS allows a network-based unauthenticated attacker to flood the device with traffic leading to a Denial of Service (DoS). The device must be configured with storm control profiling limiting the number of unknown broadcast, multicast, or unicast traffic to be vulnerable to this issue. This issue affects: Juniper Networks Junos OS on QFX5100/QFX5110/QFX5120/QFX5200/QFX5210/EX4600/EX4650 Series; 20.2 version 20.2R1 and later versions prior to 20.2R2. This issue does not affect: Juniper Networks Junos OS versions prior to 20.2R1.

A vulnerability has been found in WEKA INTEREST Security Scanner up to 1.8 and classified as problematic. This vulnerability affects unknown code of the component Portscan. The manipulation with an unknown input leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Tendermint before versions 0.33.3, 0.32.10, and 0.31.12 has a denial-of-service vulnerability. Tendermint does not limit the number of P2P connection requests. For each p2p connection, it allocates XXX bytes. Even though this memory is garbage collected once the connection is terminated (due to duplicate IP or reaching a maximum number of inbound peers), temporary memory spikes can lead to OOM (Out-Of-Memory) exceptions. Additionally, Tendermint does not reclaim activeID of a peer after it's removed in Mempool reactor. This does not happen all the time. It only happens when a connection fails (for any reason) before the Peer is created and added to all reactors. RemovePeer is therefore called before AddPeer, which leads to always growing memory (activeIDs map). The activeIDs map has a maximum size of 65535 and the node will panic if this map reaches the maximum. An attacker can create a lot of connection attempts (exploiting above denial of service), which ultimately will lead to the node panicking. These issues are patched in Tendermint 0.33.3 and 0.32.10.

OPC UA .NET Standard Stack 1.04.368 allows remote attacker to cause a crash via a crafted message that triggers excessive memory allocation.

A security vulnerability has been identified in Apache Kafka. It affects all releases since 2.8.0. The vulnerability allows malicious unauthenticated clients to allocate large amounts of memory on brokers. This can lead to brokers hitting OutOfMemoryException and causing denial of service. Example scenarios: - Kafka cluster without authentication: Any clients able to establish a network connection to a broker can trigger the issue. - Kafka cluster with SASL authentication: Any clients able to establish a network connection to a broker, without the need for valid SASL credentials, can trigger the issue. - Kafka cluster with TLS authentication: Only clients able to successfully authenticate via TLS can trigger the issue. We advise the users to upgrade the Kafka installations to one of the 3.2.3, 3.1.2, 3.0.2, 2.8.2 versions.

A vulnerability in the Session Initiation Protocol (SIP) of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect handling of incoming SIP traffic. An attacker could exploit this vulnerability by sending a series of SIP packets to an affected device. A successful exploit could allow the attacker to exhaust memory on an affected device, causing it to crash and leading to a DoS condition.

Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Client, Apache ActiveMQ Broker. An authenticated user can cause a broker DoS by sending a crafted OpenWire Message with a large encoded size value for the map. OpenWire message property maps are unmarshaled without size validation which can trigger OOM and crash the broker. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

The Kubelet component in versions 1.15.0-1.15.9, 1.16.0-1.16.6, and 1.17.0-1.17.2 has been found to be vulnerable to a denial of service attack via the kubelet API, including the unauthenticated HTTP read-only API typically served on port 10255, and the authenticated HTTPS API typically served on port 10250.

To keep its cache database efficient, `named` running as a recursive resolver occasionally attempts to clean up the database. It uses several methods, including some that are asynchronous: a small chunk of memory pointing to the cache element that can be cleaned up is first allocated and then queued for later processing. It was discovered that if the resolver is continuously processing query patterns triggering this type of cache-database maintenance, `named` may not be able to handle the cleanup events in a timely manner. This in turn enables the list of queued cleanup events to grow infinitely large over time, allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.16.0 through 9.16.45 and 9.16.8-S1 through 9.16.45-S1.

The CODESYS Gateway Server V2 does not verifiy that the size of a request is within expected limits. An unauthenticated attacker may allocate an arbitrary amount of memory, which may lead to a crash of the Gateway due to an out-of-memory condition.

Binary provides encoding/decoding in Borsh and other formats. The vulnerability is a memory allocation vulnerability that can be exploited to allocate slices in memory with (arbitrary) excessive size value, which can either exhaust available memory or crash the whole program. When using `github.com/gagliardetto/binary` to parse unchecked (or wrong type of) data from untrusted sources of input (e.g. the blockchain) into slices, it's possible to allocate memory with excessive size. When `dec.Decode(&val)` method is used to parse data into a structure that is or contains slices of values, the length of the slice was previously read directly from the data itself without any checks on the size of it, and then a slice was allocated. This could lead to an overflow and an allocation of memory with excessive size value. Users should upgrade to `v0.7.1` or higher. A workaround is not to rely on the `dec.Decode(&val)` function to parse the data, but to use a custom `UnmarshalWithDecoder()` method that reads and checks the length of any slice.

A vulnerability exists in the ngx_http_scgi_module and ngx_http_uwsgi_module modules that may result in excessive memory allocation or an over-read of data. When scgi_pass or uwsgi_pass is configured, an unauthenticated attacker with man-in-the-middle (MITM) ability to control responses from an upstream server may be able to read the memory of the NGINX worker process or restart it.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Uncontrolled resource consumption in Zoom Team Chat for Zoom Desktop Client for Windows and Zoom VDI Client may allow an unauthenticated user to conduct a disclosure of information via network access.

A vulnerability in the XCP Authentication Service of the Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P) could allow an unauthenticated, remote attacker to cause a temporary service outage for all Cisco Unified CM IM&P users who are attempting to authenticate to the service, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted login message to the affected device. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing new users from successfully authenticating. Exploitation of this vulnerability does not impact Cisco Unified CM IM&P users who were authenticated prior to an attack.

Raffle Draw System v1.0 was discovered to contain a SQL injection vulnerability via the id parameter at get_ticket.php.

A flaw was found in EAP-7 during deserialization of certain classes, which permits instantiation of HashMap and HashTable with no checks on resources consumed. This issue could allow an attacker to submit malicious requests using these classes, which could eventually exhaust the heap and result in a Denial of Service.

A vulnerability in the SIP processing subsystem of Cisco BroadWorks could allow an unauthenticated, remote attacker to halt the processing of incoming SIP requests, resulting in a denial of service (DoS) condition. This vulnerability is due to improper memory handling for certain SIP requests. An attacker could exploit this vulnerability by sending a high number of SIP requests to an affected system. A successful exploit could allow the attacker to exhaust the memory that was allocated to the Cisco BroadWorks Network Servers that handle SIP traffic. If no memory is available, the Network Servers can no longer process incoming requests, resulting in a DoS condition that requires manual intervention to recover.

Memory allocation with excessive size value in Windows Local Security Authority Subsystem Service (LSASS) allows an unauthorized attacker to deny service over a network.

Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the remote read endpoint (/api/v1/read) does not validate the declared decoded length in a snappy-compressed request body before allocating memory. An unauthenticated attacker can send a small payload that causes a huge heap allocation per request. Under concurrent load this can exhaust available memory and crash the Prometheus process. This issue has been patched in versions 3.5.3 and 3.11.3.

ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in the Gif decoder. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. All users are advised to upgrade to v3.1.5 or v2.1.9.

Faktory is a language-agnostic persistent background job server. Prior to version 1.8.0, the Faktory web dashboard can suffer from denial of service by a crafted malicious url query param `days`. The vulnerability is related to how the backend reads the `days` URL query parameter in the Faktory web dashboard. The value is used directly without any checks to create a string slice. If a very large value is provided, the backend server ends up using a significant amount of memory and causing it to crash. Version 1.8.0 fixes this issue.

A vulnerability was found in docconv up to 1.2.0 and classified as problematic. This issue affects the function ConvertDocx/ConvertODT/ConvertPages/ConvertXML/XMLToText. The manipulation leads to uncontrolled memory allocation. The attack may be initiated remotely. Upgrading to version 1.2.1 is able to address this issue. The name of the patch is 42bcff666855ab978e67a9041d0cdea552f20301. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-216779.

Matrix Media Repo (MMR) is a highly configurable multi-homeserver media repository for Matrix. MMR makes requests to other servers as part of normal operation, and these resource owners can return large amounts of JSON back to MMR for parsing. In parsing, MMR can consume large amounts of memory and exhaust available memory. This is fixed in MMR v1.3.8. Users are advised to upgrade. For users unable to upgrade; forward proxies can be configured to block requests to unsafe hosts. Alternatively, MMR processes can be configured with memory limits and auto-restart. Running multiple MMR processes concurrently can help ensure a restart does not overly impact users.

Memory Allocation with Excessive Size Value vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.

IBM MQ 9.0 LTS, 9.1 LTS, 9.2 LTS, 9.3 LTS, and 9.3 CD is vulnerable to a denial of service attack caused by an error applying configuration changes. IBM X-Force ID: 290335.

Vyper is a pythonic smart contract language for the EVM. The storage allocator does not guard against allocation overflows in versions prior to 0.3.8. An attacker can overwrite the owner variable. This issue was fixed in version 0.3.8.

@grpc/grps-js implements the core functionality of gRPC purely in JavaScript, without a C++ addon. Prior to versions 1.10.9, 1.9.15, and 1.8.22, there are two separate code paths in which memory can be allocated per message in excess of the `grpc.max_receive_message_length` channel option: If an incoming message has a size on the wire greater than the configured limit, the entire message is buffered before it is discarded; and/or if an incoming message has a size within the limit on the wire but decompresses to a size greater than the limit, the entire message is decompressed into memory, and on the server is not discarded. This has been patched in versions 1.10.9, 1.9.15, and 1.8.22.

ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in image decoders. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. This flaw can be exploited to cause a denial of service (DoS) by depleting process memory, thereby affecting applications and services that rely on ImageSharp for image processing tasks. Users and administrators are advised to update to the latest version of ImageSharp that addresses this vulnerability to mitigate the risk of exploitation. The problem has been patched in v3.1.4 and v2.1.8.

A vulnerability in the VPN and management web servers of the Cisco Adaptive Security Virtual Appliance (ASAv) and Cisco Secure Firewall Threat Defense Virtual (FTDv), formerly Cisco Firepower Threat Defense Virtual, platforms could allow an unauthenticated, remote attacker to cause the virtual devices to run out of system memory, which could cause SSL VPN connection processing to slow down and eventually cease all together. This vulnerability is due to a lack of proper memory management for new incoming SSL/TLS connections on the virtual platforms. An attacker could exploit this vulnerability by sending a large number of new incoming SSL/TLS connections to the targeted virtual platform. A successful exploit could allow the attacker to deplete system memory, resulting in a denial of service (DoS) condition. The memory could be reclaimed slowly if the attack traffic is stopped, but a manual reload may be required to restore operations quickly.

Active Storage allows users to attach cloud and local files in Rails applications. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, when serving files through Active Storage's proxy delivery mode, the proxy controller loads the entire requested byte range into memory before sending it. A request with a large or unbounded Range header (e.g. `bytes=0-`) could cause the server to allocate memory proportional to the file size, possibly resulting in a DoS vulnerability through memory exhaustion. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch.

Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Starting in version 0.3.2 and prior to versions 0.3.8, 0.4.19, and 0.5.6, there is a possibility for denial of service by memory exhaustion in `net-imap`'s response parser. At any time while the client is connected, a malicious server can send can send highly compressed `uid-set` data which is automatically read by the client's receiver thread. The response parser uses `Range#to_a` to convert the `uid-set` data into arrays of integers, with no limitation on the expanded size of the ranges. Versions 0.3.8, 0.4.19, 0.5.6, and higher fix this issue. Additional details for proper configuration of fixed versions and backward compatibility are available in the GitHub Security Advisory.

In Mosquitto before 2.0.16, excessive memory is allocated based on malicious initial packets that are not CONNECT packets.

OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader  Versions Affected:  before 1.9.5 before 2.5.9 before 3.0.0-M3  Description: The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load. The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins.   Mitigation: * 2.x users should upgrade to 2.5.9. * 3.x users should upgrade to 3.0.0-M3. Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks.

Ollama (HEAD f0078ae) contains an uncontrolled memory allocation vulnerability in the GGUF metadata parser that allows remote attackers to crash the server by supplying a crafted GGUF file with attacker-controlled length and count fields in string lengths, tensor dimension counts, and metadata array counts that are used as allocation sizes without validation against remaining file size. Attackers can upload a sub-1KB crafted GGUF file via the blob upload and model create or pull API endpoints to trigger unrecoverable Go runtime out-of-memory fatal errors or makeslice panics that bypass recovery middleware and crash the entire server process.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.5 could allow an authenticated user to cause a denial of service with a specially crafted query due to improper memory allocation. IBM X-Force ID: 292639.

MessagePack for Java is a serializer implementation for Java. A denial-of-service vulnerability exists in versions prior to 0.9.11 when deserializing .msgpack files containing EXT32 objects with attacker-controlled payload lengths. While MessagePack-Java parses extension headers lazily, it later trusts the declared EXT payload length when materializing the extension data. When ExtensionValue.getData() is invoked, the library attempts to allocate a byte array of the declared length without enforcing any upper bound. A malicious .msgpack file of only a few bytes can therefore trigger unbounded heap allocation, resulting in JVM heap exhaustion, process termination, or service unavailability. This vulnerability is triggered during model loading / deserialization, making it a model format vulnerability suitable for remote exploitation. The vulnerability enables a remote denial-of-service attack against applications that deserialize untrusted .msgpack model files using MessagePack for Java. A specially crafted but syntactically valid .msgpack file containing an EXT32 object with an attacker-controlled, excessively large payload length can trigger unbounded memory allocation during deserialization. When the model file is loaded, the library trusts the declared length metadata and attempts to allocate a byte array of that size, leading to rapid heap exhaustion, excessive garbage collection, or immediate JVM termination with an OutOfMemoryError. The attack requires no malformed bytes, user interaction, or elevated privileges and can be exploited remotely in real-world environments such as model registries, inference services, CI/CD pipelines, and cloud-based model hosting platforms that accept or fetch .msgpack artifacts. Because the malicious file is extremely small yet valid, it can bypass basic validation and scanning mechanisms, resulting in complete service unavailability and potential cascading failures in production systems. Version 0.9.11 fixes the vulnerability.

NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability where a user could cause a memory allocation with excessive size value, leading to a segmentation fault, by providing an invalid request. A successful exploit of this vulnerability might lead to denial of service.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.1 and 11.5 could allow an authenticated user to cause a denial of service with a specially crafted query due to improper memory allocation. IBM X-Force ID: 294295.

Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ Client, Apache ActiveMQ, Apache ActiveMQ All. An unauthenticated network attacker can cause a broker DoS by sending a crafted WireFormatInfo frame with a malicious large size value. The value is not validate and causes the broker to attempt allocation during pre-auth negotiation which can trigger OOM and crash the broker. This issue affects Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp. An unauthenticated client that opens a STOMP NIO connection can send header bytes that never terminate which makes the broker buffer them without limit, exhausting the JVM heap. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

An attacker might be able to trick DNSdist into allocating too much memory while processing DNS over QUIC or DNS over HTTP/3 payloads, resulting in a denial of service. In setups with a large quantity of memory available this usually results in an exception and the QUIC connection is properly closed, but in some cases the system might enter an out-of-memory state instead and terminate the process.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, the libcurl write_callback function in the KMC crypto service client allows unbounded memory growth by reallocating response buffers without any size limit or overflow check. A malicious KMC server can return arbitrarily large HTTP responses, forcing the client to allocate excessive memory until the process is terminated by the OS. This issue has been patched in version 1.4.3.

As noted in the “VTPM.md” file in the eve documentation, “VTPM is a server listening on port 8877 in EVE, exposing limited functionality of the TPM to the clients. VTPM allows clients to execute tpm2-tools binaries from a list of hardcoded options” The communication with this server is done using protobuf, and the data is comprised of 2 parts: 1. Header 2. Data When a connection is made, the server is waiting for 4 bytes of data, which will be the header, and these 4 bytes would be parsed as uint32 size of the actual data to come. Then, in the function “handleRequest” this size is then used in order to allocate a payload on the stack for the incoming data. As this payload is allocated on the stack, this will allow overflowing the stack size allocated for the relevant process with freely controlled data. * An attacker can crash the system. * An attacker can gain control over the system, specifically on the “vtpm_server” process which has very high privileges.

NVIDIA Triton Inference Server contains a vulnerability where insufficient input validation and a large number of outputs could cause a server crash. A successful exploit of this vulnerability might lead to denial of service.

SvelteKit is a framework for rapidly developing robust, performant web applications using Svelte. From 2.49.0 to 2.49.4, the experimental form remote function uses a binary data format containing a representation of submitted form data. A specially-crafted payload can cause the server to allocate a large amount of memory, causing DoS via memory exhaustion. This vulnerability is fixed in 2.49.5.

Stalwart is a mail and collaboration server. Versions 0.13.3 and below contain an unbounded memory allocation vulnerability in the IMAP protocol parser which allows remote attackers to exhaust server memory, potentially triggering the system's out-of-memory (OOM) killer and causing a denial of service. The CommandParser implementation enforces size limits on its dynamic buffer in most parsing states, but several state handlers omit these validation checks. This issue is fixed in version 0.13.4. A workaround for this issue is to implement rate limiting and connection monitoring at the network level, however this does not provide complete protection.

A flaw was found in libssh. A remote authenticated client can issue SSH_FXP_READ requests with an arbitrarily large length, causing a libssh SFTP server to allocate excessive memory and potentially exhaust it through repeated requests.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a crafted SVG file containing an malicious element causes ImageMagick to attempt to allocate ~674 GB of memory, leading to an out-of-memory abort. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

RTPS dissector memory leak in Wireshark 4.0.0 to 4.0.8 and 3.6.0 to 3.6.16 allows denial of service via packet injection or crafted capture file

Russh is a Rust SSH client & server library. Prior to version 0.60.1, a pre-authentication denial-of-service vulnerability exists in the server's keyboard-interactive authentication handler. A malicious client can crash any russh-based server that implements keyboard-interactive auth (e.g., for 2FA/TOTP) with a single malformed packet, requiring no credentials. This issue has been patched in version 0.60.1.

Erlang is a programming language and runtime system for building massively scalable soft real-time systems with requirements on high availability. OTP is a set of Erlang libraries, which consists of the Erlang runtime system, a number of ready-to-use components mainly written in Erlang. Packet size is not verified properly for SFTP packets. As a result when multiple SSH packets (conforming to max SSH packet size) are received by ssh, they might be combined into an SFTP packet which will exceed the max allowed packet size and potentially cause large amount of memory to be allocated. Note that situation described above can only happen for successfully authenticated users after completing the SSH handshake. This issue has been patched in OTP versions 27.2.4, 26.2.5.9, and 25.3.2.18. There are no known workarounds for this vulnerability.

Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.5.7, 0.4.20, 0.3.9, and 0.2.5, there is a possibility for denial of service by memory exhaustion when net-imap reads server responses. At any time while the client is connected, a malicious server can send can send a "literal" byte count, which is automatically read by the client's receiver thread. The response reader immediately allocates memory for the number of bytes indicated by the server response. This should not be an issue when securely connecting to trusted IMAP servers that are well-behaved. It can affect insecure connections and buggy, untrusted, or compromised servers (for example, connecting to a user supplied hostname). This issue has been patched in versions 0.5.7, 0.4.20, 0.3.9, and 0.2.5.

OpenTelemetry dotnet is a dotnet telemetry framework. In OpenTelemetry.Api 0.5.0-beta.2 to 1.15.2 and OpenTelemetry.Extensions.Propagators 1.3.1 to 1.15.2, The implementation details of the baggage, B3 and Jaeger processing code in the OpenTelemetry.Api and OpenTelemetry.Extensions.Propagators NuGet packages can allocate excessive memory when parsing which could create a potential denial of service (DoS) in the consuming application. This vulnerability is fixed in 1.15.3.

Navidrome is an open source web-based music collection server and streamer. Prior to version 0.60.0, authenticated users can crash the Navidrome server by supplying an excessively large size parameter to /rest/getCoverArt or to a shared-image URL (/share/img/<token>). When processing such requests, the server attempts to create an extremely large resized image, causing uncontrolled memory growth. This triggers the Linux OOM killer, terminates the Navidrome process, and results in a full service outage. If the system has sufficient memory and survives the allocation, Navidrome then writes these extremely large resized images into its cache directory, allowing an attacker to rapidly exhaust server disk space as well. This issue has been patched in version 0.60.0.

Archive::Tar versions before 3.10 for Perl allow memory exhaustion via attacker controlled entry size field in tar header. _read_tar() reads each entry's payload with $handle->read($$data, $block), where $block is derived from the entry's 12-byte size field in the tar header with no upper bound on that value. A crafted header declaring a multi-gigabyte size causes Perl to allocate a scalar of that size.

zrok is software for sharing web services, files, and network resources. Prior to version 2.0.1, endpoints.GetSessionCookie parses an attacker-supplied cookie chunk count and calls make([]string, count) with no upper bound before any token validation occurs. The function is reached on every request to an OAuth-protected proxy share, allowing an unauthenticated remote attacker to trigger gigabyte-scale heap allocations per request, leading to process-level OOM termination or repeated goroutine panics. Both publicProxy and dynamicProxy are affected. Version 2.0.1 patches the issue.

SoftEtherVPN is a an open-source cross-platform multi-protocol VPN Program. In 5.2.5188 and earlier, a pre-authentication denial-of-service vulnerability exists in SoftEther VPN Developer Edition 5.2.5188 (and likely earlier versions of Developer Edition). An unauthenticated remote attacker can crash the vpnserver process by sending a single malformed EAP-TLS packet over raw L2TP (UDP/1701), terminating all active VPN sessions.

Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final, when decoding header blocks, the non-Huffman branch of io.netty.handler.codec.http3.QpackDecoder#decodeHuffmanEncodedLiteral may execute new byte[length] for a string literal before verifying that length bytes are actually present in the compressed field section. The wire encoding allows a very large length to be expressed in few bytes. There is no check that length <= in.readableBytes() before new byte[length]. This vulnerability is fixed in 4.2.13.Final.

IBM 4769 Developers Toolkit 7.0.0 through 7.5.52 could allow a remote attacker to cause a denial of service in the Hardware Security Module (HSM) due to improper memory allocation of an excessive size.

Erlang/OTP is a set of libraries for the Erlang programming language. Prior to versions OTP-27.3.1, 26.2.5.10, and 25.3.2.19, a maliciously formed KEX init message can result with high memory usage. Implementation does not verify RFC specified limits on algorithm names (64 characters) provided in KEX init message. Big KEX init packet may lead to inefficient processing of the error data. As a result, large amount of memory will be allocated for processing malicious data. Versions OTP-27.3.1, OTP-26.2.5.10, and OTP-25.3.2.19 fix the issue. Some workarounds are available. One may set option `parallel_login` to `false` and/or reduce the `max_sessions` option.

CImg Library is a C++ library for image processing. Prior to version 4.0.0 in `_load_analyze()`, the header_size field is read as an `unsigned int` from the first 4 bytes of an Analyze/NIfTI file and passed directly to `new unsigned char[header_size]` without being bounded against the actual file size. A value up to ~4 GB is accepted. If the subsequent `fread` returns `short` as it will for any malformed file), the function throws a `CImgIOException` and the allocated buffer is never freed. A 6-byte crafted file is sufficient to trigger an allocation of ~1.3 GB per call, with the full allocation leaked on every error path. The issue is reachable via `load_analyze()` and the generic `load()` when the file extension is .hdr, .img, or .nii. Version 4.0.0 fixes the issue.

adm-zip before 0.5.18 is vulnerable to denial of service via a crafted ZIP file with a manipulated uncompressed size header field. In zipEntry.js line 103, Buffer.alloc(_centralHeader.size) allocates memory based on the declared uncompressed size from the ZIP central directory header without validating it against the actual compressed data size or imposing any upper bound. The size value is read directly from the binary header at entryHeader.js line 266 with no bounds check. An attacker can craft a ~120-byte ZIP file that declares ~4GB uncompressed size, causing a memory allocation amplification ratio of over 33 million to 1. The allocation occurs before CRC validation, so the malicious payload cannot be rejected early. All extraction and read methods are affected: readFile(), readAsText(), extractEntryTo(), extractAllTo(), extractAllToAsync(), test(), and entry.getData(). Any application accepting untrusted ZIP files via adm-zip is vulnerable to immediate process crash.