The Single Sign On For TNG plugin for WordPress is vulnerable to Authentication Bypass via unauthenticated password reset in all versions up to, and including, 2.0.0. This is due to the `ssoprocess_ajax()` function — registered on `wp_ajax_nopriv_ssoprocess_ajax` and therefore reachable without authentication — accepting an attacker-supplied `email` parameter with the `setnewpassword` operation and calling `reset_password()` on the resolved account without any ownership token, email confirmation link, or capability check. The sole guard is a call to `check_ajax_referer()`, which provides no authorization barrier because the `ssoajaxnonce` nonce is publicly broadcast on every front-end page via `wp_localize_script()` into the `SSOPWDREQUIREMENT` JavaScript object; since WordPress computes nonces for logged-out visitors against a shared anonymous session context, any unauthenticated visitor can scrape a valid nonce from the homepage and use it to authenticate the request. This makes it possible for unauthenticated attackers to change the password of any WordPress account, including administrator accounts, enabling complete site takeover.

Action Pack is a framework for handling and responding to web requests. In versions prior to 7.2.3.2, 8.0.5.1 and 8.1.3.1, Active Storage does not disable libvips operations marked unsafe for untrusted content, allowing a crafted upload to invoke such an operation. Consuming applications are affected when configured to use libvips and accept image uploads from untrusted users. An unauthenticated attacker may exploit this behavior to read arbitrary files accessible to the Rails process, including environment variables and application secrets. Exposure of credentials such as secret_key_base or external-service tokens may enable remote code execution or lateral movement. This issue has been fixed in versions 7.2.3.2, 8.0.5.1 and 8.1.3.1.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reject oversized nested action attrs Open vSwitch stores generated flow actions as nlattrs, whose nla_len field is u16. Commit a1e64addf3ff ("net: openvswitch: remove misbehaving actions length check") allowed the total sw_flow_actions stream to grow beyond 64 KiB, which is valid, but also removed the last guard preventing a generated nested action attribute from exceeding U16_MAX. An oversized generated container can thus be closed with a truncated nla_len. A later dump or teardown then walks a structurally different stream than the one that was validated. In particular, an oversized nested CLONE/CT action may cause subsequent bytes in the generated stream to be interpreted as independent actions. Keep the larger total-action-stream behavior, but make nested action close reject generated containers that do not fit in nla_len, and return the error through all callers. For recursive SAMPLE, CLONE, DEC_TTL, and CHECK_PKT_LEN builders, trim resource-owning action-list tails in reverse construction order before discarding failed wrappers, so resources copied into the rejected tails are released before the wrappers are removed. Most failed outer wrappers are discarded by truncating actions_len after child resources have been released. CHECK_PKT_LEN also trims its parent after branch resources are gone. SET/TUNNEL close failures unwind their known tun_dst ownership directly, and SET_TO_MASKED has no external ownership and truncates on close failure.

The Everest Toolkit WordPress plugin through 1.2.3 does not validate the type of files uploaded during demo-content import (the WordPress file-type test is disabled), allowing high-privilege users (Administrator by default, including non-super-admin site administrators on multisite) to upload executable PHP files to the uploads directory.

The Demo Import WordPress plugin through 1.1.3 does not validate the type of files uploaded during demo-content import (the WordPress file-type test is disabled), allowing high-privilege users (Administrator by default, including non-super-admin site administrators on multisite) to upload executable PHP files to the uploads directory.

The fix for CVE-2026-12045 in pgAdmin 4 9.16 required the LLM-supplied query passed to the AI Assistant's execute_sql_query tool to parse, via sqlparse, as exactly one non-transaction-control statement before running it inside a BEGIN TRANSACTION READ ONLY wrapper. sqlparse's string-literal lexing can disagree with PostgreSQL's own parser: under standard_conforming_strings = on (PostgreSQL's default since 9.1), a backslash immediately before a quote is an ordinary character to PostgreSQL, but sqlparse treats it as escaping the quote. A payload such as SELECT '\';COMMIT;CREATE TABLE pwn(x int);SELECT 1 --' therefore parses as a single SELECT to sqlparse's validator, while PostgreSQL executes it as four statements: the smuggled COMMIT ends the wrapping read-only transaction, and the trailing ROLLBACK becomes a no-op. This reintroduces the same write/RCE bypass CVE-2026-12045 was meant to close, reachable via the same indirect prompt-injection delivery (an attacker plants the payload in any object the AI Assistant may read; the LLM emits it as a tool call). An initial candidate fix ran the query with psycopg's execute(..., prepare=True), intending to force PostgreSQL's own Parse step (extended query protocol) to reject multi-statement text regardless of sqlparse's classification. This candidate fix does not work as submitted: psycopg3's PrepareManager silently ignores the prepare argument whenever the connection's prepare_threshold is None, which is pgAdmin's default for every server connection (the per-server "Prepare threshold" field is blank unless an administrator explicitly sets it) -- psycopg3 falls back to the simple query protocol, the same multi-statement-capable path the bypass exploits, so the candidate fix closes nothing on any real-world default configuration. The corrected fix sets conn.prepare_threshold = 0 directly on the dedicated, single-use read-only connection the AI Assistant tool opens, structurally forcing the extended query protocol independent of any server-level configuration. Verified against a live PostgreSQL 18 instance: the payload executes successfully under the prepare_threshold=None (default) behavior, and is rejected with "cannot insert multiple commands into a prepared statement" once prepare_threshold=0 is set on that connection. This issue affects pgAdmin 4: from 9.13 before 9.17.

A crafted request uri-path can cause mod_proxy to forward the request to an origin server choosen by the remote user. This issue affects Apache HTTP Server 2.4.48 and earlier.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 11.9. GitLab was not properly validating image files that were passed to a file parser which resulted in a remote command execution.

When running Apache Tomcat 7.0.0 to 7.0.79 on Windows with HTTP PUTs enabled (e.g. via setting the readonly initialisation parameter of the Default to false) it was possible to upload a JSP file to the server via a specially crafted request. This JSP could then be requested and any code it contained would be executed by the server.

Unspecified vulnerability in BlazeDS 3.2 and earlier, as used in LiveCycle 8.0.1, 8.2.1, and 9.0, LiveCycle Data Services 2.5.1, 2.6.1, and 3.0, Flex Data Services 2.0.1, and ColdFusion 7.0.2, 8.0, 8.0.1, and 9.0, allows remote attackers to obtain sensitive information via vectors that are associated with a request, and related to injected tags and external entity references in XML documents.

An issue in the parseGoosePayload() function (/goose/goose_receiver.c) of libiec61850 v1.6 allows attackers to bypass authentication via a captured GOOSE frame.

Camaleon CMS versions 2.1.1 through 2.9.1 contains an authenticated remote code execution vulnerability that allows users with custom_fields manage permission to execute arbitrary Ruby code by supplying a malicious expression through the select_eval custom field type. Attackers can store an attacker-controlled Ruby expression in the field options command parameter, which is evaluated via instance_eval within an ERB view whenever a post edit page is rendered, achieving server-side code execution with web server process privileges.

Jupyter Server is the backend for Jupyter web applications. In versions 2.17.0 and earlier, a path traversal vulnerability in the REST API allows an authenticated user to escape the configured root_dir and access sibling directories whose names begin with the same prefix as the root_dir. For example, with a root_dir named "test", the API permits access to a sibling directory named "testtest" through a crafted request to the /api/contents endpoint using encoded path components. An attacker can read, write, and delete files in affected sibling directories. Multi-tenant deployments using predictable naming schemes are particularly at risk, as a user with a directory named "user1" could access directories for user10 through user19 and beyond. A user who can choose a single-character folder name could gain access to a significant number of sibling directories. Version 2.18.0 contains a fix. As a workaround, ensure folder names do not share a common prefix with any sibling directory.

Image::WebP versions before 0.3.0 for Perl bundle a vulnerable version of libwebp. Image::WebP does not link to the system libwebp. Instead, it uses a bundled copy of libwebp 0.3.0 (released 2013-03-20). That version has multiple known vulnerabilities, including CVE-2023-4863. Any caller that decodes an untrusted WebP image reaches the bundled decoder. Because the library is compiled into the module, upgrading the system libwebp does not remediate this.

The Realtyna Organic IDX plugin + WPL Real Estate plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 5.2.0 via the upload function. This is due to missing file type validation in the upload function, combined with a publicly accessible I/O endpoint authenticated solely by static, plugin-seeded API credentials that are identical across all installations. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. The WPL I/O service endpoint is registered on the public WordPress init hook with no WordPress capability check, and the required api_key and api_secret values are static defaults seeded by the plugin's own SQL migration files, meaning any unauthenticated attacker who knows these publicly documented defaults can reach and exploit the vulnerable upload path.

facil.io 0.7.5 through 0.7.6 contains a denial-of-service vulnerability in the HTTP/1.1 chunked transfer encoding parser that allows unauthenticated remote attackers to crash the server by sending a negative chunk size value. Attackers can send a single POST request with a Transfer-Encoding: chunked header containing a leading minus sign in the chunk size field, causing the parser in http1_parser.h to compute a large positive integer from the negated value, corrupting internal state and moving the read pointer into unmapped memory resulting in a fault.

facil.io 0.6.0 through 0.7.6 contains a denial-of-service vulnerability in the multipart body parser that allows an unauthenticated remote attacker to permanently freeze worker processes at 100% CPU by sending a multipart/form-data request with a partial closing boundary. The missing progress guard in the parser loop causes http_mime_parse to return 0 bytes consumed without setting done or error flags, causing the calling loop to re-invoke the parser on the same buffer indefinitely, exhausting all workers and permanently disabling the server until manually restarted.

facil.io 0.6.0 through 0.7.6 contains an integer underflow vulnerability in the multipart MIME body parser that allows unauthenticated remote attackers to crash the server process by sending a crafted Content-Disposition header with an empty field name. Attackers can trigger a uint32_t wraparound in http_mime_parser.h causing an out-of-bounds memory read past the name pointer, resulting in a bus fault that crashes the handling worker with a single POST request.

Wolf CMS through 0.8.3.1 contains a remote code execution vulnerability in FileManagerController that allows authenticated attackers to create arbitrary PHP files by exploiting missing file extension validation in the create_file() and save() functions. Attackers with the file_manager_mkfile capability can write malicious PHP content into the web-accessible FILES_DIR directory and trigger execution by requesting the file over HTTP.

Rejected reason: DO NOT USE THIS CVE RECORD. ConsultIDs: none. Reason: This record was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none.

In the Linux kernel, the following vulnerability has been resolved: xfs: resample the data fork mapping after cycling ILOCK xfs_reflink_fill_{cow_hole,delalloc} are both presented with an inode, a data fork mapping, and a cow fork mapping. Unfortunately, these two helpers cycle the ILOCK to grab a transaction, which means that the mappings are stale as soon as we reacquire the ILOCK. Currently we refresh the cow fork mapping by re-calling xfs_find_trim_cow_extent, but we don't refresh the data fork mapping beforehand, which means that the xfs_bmap_trim_cow in that function queries the refcount btree about the wrong physical blocks and returns an inaccurate value in *shared. If *shared is now false, the directio write proceeds with a stale data fork mapping. Fix this by querying the data fork mapping if the sequence counter changes across the ILOCK cycle.

Allows arbitrary filesystem writes outside the extraction directory during extraction with filter="data". You are affected by this vulnerability if using the tarfile module to extract untrusted tar archives using TarFile.extractall() or TarFile.extract() using the filter= parameter with a value of "data" or "tar". See the tarfile extraction filters documentation https://docs.python.org/3/library/tarfile.html#tarfile-extraction-filter  for more information. Note that for Python 3.14 or later the default value of filter= changed from "no filtering" to `"data", so if you are relying on this new default behavior then your usage is also affected. Note that none of these vulnerabilities significantly affect the installation of source distributions which are tar archives as source distributions already allow arbitrary code execution during the build process. However when evaluating source distributions it's important to avoid installing source distributions with suspicious links.

Allows the extraction filter to be ignored, allowing symlink targets to point outside the destination directory, and the modification of some file metadata. You are affected by this vulnerability if using the tarfile module to extract untrusted tar archives using TarFile.extractall() or TarFile.extract() using the filter= parameter with a value of "data" or "tar". See the tarfile extraction filters documentation https://docs.python.org/3/library/tarfile.html#tarfile-extraction-filter  for more information. Note that for Python 3.14 or later the default value of filter= changed from "no filtering" to `"data", so if you are relying on this new default behavior then your usage is also affected. Note that none of these vulnerabilities significantly affect the installation of source distributions which are tar archives as source distributions already allow arbitrary code execution during the build process. However when evaluating source distributions it's important to avoid installing source distributions with suspicious links.

shell-quote's `quote()` function did not validate object-token inputs against the operator model used by `parse()`. The `.op` field was backslash-escaped character by character using `/(.)/g`, which in JavaScript does not match line terminators (\n, \r, U+2028, U+2029). A line terminator in `.op` therefore passed through unescaped into the output; POSIX shells treat a literal newline as a command separator, so any content after it would execute as a second command. The vulnerable code path is reachable in two ways: (1) direct construction of `{ op: '...\n...' }` from external input, and (2) via `parse(cmd, envFn)` when `envFn` returns object tokens whose `.op` is attacker-influenced. Both are documented API surface. Fixed by replacing the per-character escape with strict shape validation: `.op` must match the parser's control-operator allowlist; `{ op: 'glob', pattern }` validates `pattern` and forbids line terminators; `{ comment }` validates `comment` and forbids line terminators; any other object shape throws `TypeError`.

gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening.

(*x509.Certificate).VerifyHostname previously called matchHostnames in a loop over all DNS Subject Alternative Name (SAN) entries. This caused strings.Split(host, ".") to execute repeatedly on the same input hostname. With a large DNS SAN list, verification costs scaled quadratically based on the number of SAN entries multiplied by the hostname's label count. Because x509.Verify validates hostnames before building the certificate chain, this overhead occurred even for untrusted certificates.

Lodash versions 4.0.0 through 4.17.22 are vulnerable to prototype pollution in the _.unset and _.omit functions. An attacker can pass crafted paths which cause Lodash to delete methods from global prototypes. The issue permits deletion of properties but does not allow overwriting their original behavior. This issue is patched on 4.17.23

Traq versions 2.0 through 2.3 contain a remote code execution vulnerability in the admincp/common.php script. The flawed authorization logic fails to halt execution after a failed access check, allowing unauthenticated users to reach admin-only functionality. This can be exploited via plugins.php to inject and execute arbitrary PHP code.

In Cleo Harmony before 5.8.0.21, VLTrader before 5.8.0.21, and LexiCom before 5.8.0.21, there is an unrestricted file upload and download that could lead to remote code execution.

Windows Kernel Elevation of Privilege Vulnerability

Sensitive information disclosure in NetScaler ADC and NetScaler Gateway when configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) or AAA  virtual server.

In SysAid On-Premise before 23.3.36, a path traversal vulnerability leads to code execution after an attacker writes a file to the Tomcat webroot, as exploited in the wild in November 2023.

A heap-based buffer overflow vulnerability [CWE-122] in FortiOS version 7.2.4 and below, version 7.0.11 and below, version 6.4.12 and below, version 6.0.16 and below and FortiProxy version 7.2.3 and below, version 7.0.9 and below, version 2.0.12 and below, version 1.2 all versions, version 1.1 all versions SSL-VPN may allow a remote attacker to execute arbitrary code or commands via specifically crafted requests.

Multiple Zoho ManageEngine on-premise products, such as ServiceDesk Plus through 14003, allow remote code execution due to use of Apache Santuario xmlsec (aka XML Security for Java) 1.4.1, because the xmlsec XSLT features, by design in that version, make the application responsible for certain security protections, and the ManageEngine applications did not provide those protections. This affects Access Manager Plus before 4308, Active Directory 360 before 4310, ADAudit Plus before 7081, ADManager Plus before 7162, ADSelfService Plus before 6211, Analytics Plus before 5150, Application Control Plus before 10.1.2220.18, Asset Explorer before 6983, Browser Security Plus before 11.1.2238.6, Device Control Plus before 10.1.2220.18, Endpoint Central before 10.1.2228.11, Endpoint Central MSP before 10.1.2228.11, Endpoint DLP before 10.1.2137.6, Key Manager Plus before 6401, OS Deployer before 1.1.2243.1, PAM 360 before 5713, Password Manager Pro before 12124, Patch Manager Plus before 10.1.2220.18, Remote Access Plus before 10.1.2228.11, Remote Monitoring and Management (RMM) before 10.1.41. ServiceDesk Plus before 14004, ServiceDesk Plus MSP before 13001, SupportCenter Plus before 11026, and Vulnerability Manager Plus before 10.1.2220.18. Exploitation is only possible if SAML SSO has ever been configured for a product (for some products, exploitation requires that SAML SSO is currently active).

Reliance on untrusted inputs in a security decision in Microsoft Office allows an unauthorized attacker to bypass a security feature locally.

Use of a broken or risky cryptographic algorithm in Windows Kerberos allows an authorized attacker to disclose information locally.

Time-of-check time-of-use (toctou) race condition in Windows Subsystem for Linux allows an authorized attacker to perform tampering locally.

Improper authorization in Active Directory Certificate Services (AD CS) allows an authorized attacker to elevate privileges over a network.

Exposure of private personal information to an unauthorized actor in Microsoft Defender allows an authorized attacker to disclose information locally.

Incorrect conversion between numeric types in Windows NTFS allows an authorized attacker to elevate privileges locally.

Use after free in Windows Remote Desktop Services allows an authorized attacker to elevate privileges over a network.

Exposure of sensitive information to an unauthorized actor in Windows Win32K allows an authorized attacker to disclose information locally.

Improper privilege management in Microsoft Install Service allows an authorized attacker to elevate privileges locally.

Improper neutralization of special elements used in a command ('command injection') in Windows Narrator Braille allows an authorized attacker to elevate privileges locally.

Deserialization of untrusted data in Microsoft Office SharePoint allows an unauthorized attacker to execute code over a network.

Missing authentication for critical function in Microsoft Office SharePoint allows an unauthorized attacker to elevate privileges over a network.

Improper authentication in Azure Spring Apps allows an authorized attacker to elevate privileges over a network.