T1078

An Improper Authentication issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series V5.3.1 build 150410 to V5.4.4 Build 161125, DS-2CD4x2xFWD Series V5.2.0 build 140721 to V5.4.0 Build 160414, DS-2CD4xx5 Series V5.2.0 build 140721 to V5.4.0 Build 160421, DS-2DFx Series V5.2.0 build 140805 to V5.4.5 Build 160928, and DS-2CD63xx Series V5.0.9 build 140305 to V5.3.5 Build 160106 devices. The improper authentication vulnerability occurs when an application does not adequately or correctly authenticate users. This may allow a malicious user to escalate his or her privileges on the system and gain access to sensitive information.

A stack-based buffer overflow in Ivanti Connect Secure before version 22.7R2.5, Ivanti Policy Secure before version 22.7R1.2, and Ivanti Neurons for ZTA gateways before version 22.7R2.3 allows a remote unauthenticated attacker to achieve remote code execution.

Insufficient input validation leading to memory overread when the NetScaler is configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) OR AAA virtual server

Craft is a flexible, user-friendly CMS for creating custom digital experiences on the web and beyond. Starting from version 3.0.0-RC1 to before 3.9.15, 4.0.0-RC1 to before 4.14.15, and 5.0.0-RC1 to before 5.6.17, Craft is vulnerable to remote code execution. This is a high-impact, low-complexity attack vector. This issue has been patched in versions 3.9.15, 4.14.15, and 5.6.17, and is an additional fix for CVE-2023-41892.

An authentication bypass in Palo Alto Networks PAN-OS software enables an unauthenticated attacker with network access to the management web interface to gain PAN-OS administrator privileges to perform administrative actions, tamper with the configuration, or exploit other authenticated privilege escalation vulnerabilities like CVE-2024-9474 https://security.paloaltonetworks.com/CVE-2024-9474 . The risk of this issue is greatly reduced if you secure access to the management web interface by restricting access to only trusted internal IP addresses according to our recommended  best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 . This issue is applicable only to PAN-OS 10.2, PAN-OS 11.0, PAN-OS 11.1, and PAN-OS 11.2 software. Cloud NGFW and Prisma Access are not impacted by this vulnerability.

CWP (aka Control Web Panel or CentOS Web Panel) before 0.9.8.1205 allows unauthenticated remote code execution via shell metacharacters in the t_total parameter in a filemanager changePerm request. A valid non-root username must be known.

Langflow is a tool for building and deploying AI-powered agents and workflows. In versions prior to 1.9.0, the POST /api/v1/build_public_tmp/{flow_id}/flow endpoint allows building public flows without requiring authentication. When the optional data parameter is supplied, the endpoint uses attacker-controlled flow data (containing arbitrary Python code in node definitions) instead of the stored flow data from the database. This code is passed to exec() with zero sandboxing, resulting in unauthenticated remote code execution. This is distinct from CVE-2025-3248, which fixed /api/v1/validate/code by adding authentication. The build_public_tmp endpoint is designed to be unauthenticated (for public flows) but incorrectly accepts attacker-supplied flow data containing arbitrary executable code. This issue has been fixed in version 1.9.0.

An Authentication Bypass Using an Alternate Path or Channel vulnerability [CWE-288] affecting FortiOS version 7.0.0 through 7.0.16 and FortiProxy version 7.0.0 through 7.0.19 and 7.2.0 through 7.2.12 allows a remote attacker to gain super-admin privileges via crafted requests to Node.js websocket module.

n8n is an open source workflow automation platform. Versions starting with 0.211.0 and prior to 1.120.4, 1.121.1, and 1.122.0 contain a critical Remote Code Execution (RCE) vulnerability in their workflow expression evaluation system. Under certain conditions, expressions supplied by authenticated users during workflow configuration may be evaluated in an execution context that is not sufficiently isolated from the underlying runtime. An authenticated attacker could abuse this behavior to execute arbitrary code with the privileges of the n8n process. Successful exploitation may lead to full compromise of the affected instance, including unauthorized access to sensitive data, modification of workflows, and execution of system-level operations. This issue has been fixed in versions 1.120.4, 1.121.1, and 1.122.0. Users are strongly advised to upgrade to a patched version, which introduces additional safeguards to restrict expression evaluation. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only; and/or deploy n8n in a hardened environment with restricted operating system privileges and network access to reduce the impact of potential exploitation. These workarounds do not fully eliminate the risk and should only be used as short-term measures.

Erlang/OTP is a set of libraries for the Erlang programming language. Prior to versions OTP-27.3.3, OTP-26.2.5.11, and OTP-25.3.2.20, a SSH server may allow an attacker to perform unauthenticated remote code execution (RCE). By exploiting a flaw in SSH protocol message handling, a malicious actor could gain unauthorized access to affected systems and execute arbitrary commands without valid credentials. This issue is patched in versions OTP-27.3.3, OTP-26.2.5.11, and OTP-25.3.2.20. A temporary workaround involves disabling the SSH server or to prevent access via firewall rules.

A missing authentication for critical function in FortiManager 7.6.0, FortiManager 7.4.0 through 7.4.4, FortiManager 7.2.0 through 7.2.7, FortiManager 7.0.0 through 7.0.12, FortiManager 6.4.0 through 6.4.14, FortiManager 6.2.0 through 6.2.12, Fortinet FortiManager Cloud 7.4.1 through 7.4.4, FortiManager Cloud 7.2.1 through 7.2.7, FortiManager Cloud 7.0.1 through 7.0.12, FortiManager Cloud 6.4.1 through 6.4.7 allows attacker to execute arbitrary code or commands via specially crafted requests.

MikroTik RouterOS through 6.42 allows unauthenticated remote attackers to read arbitrary files and remote authenticated attackers to write arbitrary files due to a directory traversal vulnerability in the WinBox interface.

An Improper Authentication vulnerability in the SSLVPN authentication mechanism allows a remote attacker to bypass authentication.

SimpleHelp remote support software v5.5.7 and before is vulnerable to multiple path traversal vulnerabilities that enable unauthenticated remote attackers to download arbitrary files from the SimpleHelp host via crafted HTTP requests. These files include server configuration files containing various secrets and hashed user passwords.

A privilege escalation vulnerability in Palo Alto Networks PAN-OS software allows a PAN-OS administrator with access to the management web interface to perform actions on the firewall with root privileges. Cloud NGFW and Prisma Access are not impacted by this vulnerability.

Gladinet CentreStack through 16.1.10296.56315 (fixed in 16.4.10315.56368) has a deserialization vulnerability due to the CentreStack portal's hardcoded machineKey use, as exploited in the wild in March 2025. This enables threat actors (who know the machineKey) to serialize a payload for server-side deserialization to achieve remote code execution. NOTE: a CentreStack admin can manually delete the machineKey defined in portal\web.config.

Livewire is a full-stack framework for Laravel. In Livewire v3 up to and including v3.6.3, a vulnerability allows unauthenticated attackers to achieve remote command execution in specific scenarios. The issue stems from how certain component property updates are hydrated. This vulnerability is unique to Livewire v3 and does not affect prior major versions. Exploitation requires a component to be mounted and configured in a particular way, but does not require authentication or user interaction. This issue has been patched in Livewire v3.6.4. All users are strongly encouraged to upgrade to this version or later as soon as possible. No known workarounds are available.

SolarWinds Web Help Desk was found to be susceptible to an unauthenticated AjaxProxy deserialization remote code execution vulnerability that, if exploited, would allow an attacker to run commands on the host machine. This vulnerability is a patch bypass of CVE-2024-28988, which in turn is a patch bypass of CVE-2024-28986.

Adobe Reader and Acrobat 9.x before 9.5.4, 10.x before 10.1.6, and 11.x before 11.0.02 allow remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted PDF document, as exploited in the wild in February 2013.

Insufficient input validation in NetScaler ADC and NetScaler Gateway when configured as a SAML IDP leading to memory overread

Update: On November 5, 2025, Cisco became aware of a new attack variant against devices running Cisco Secure ASA Software or Cisco Secure FTD Software releases that are affected by CVE-2025-20333 and CVE-2025-20362. This attack can cause unpatched devices to unexpectedly reload, leading to denial of service (DoS) conditions. Cisco strongly recommends that all customers upgrade to the fixed software releases that are listed in the Fixed Software ["#fs"] section of this advisory. A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to access restricted URL endpoints that are related to remote access VPN that should otherwise be inaccessible without authentication. This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web server on a device. A successful exploit could allow the attacker to access a restricted URL without authentication.

May 2026: This security advisory provides the details and fix information for a vulnerability that was discovered and fixed after the was disclosed in February 2026. This new advisory is for a new vulnerability in the control connection handshaking. The section of this advisory includes Show Control Connections guidance to help with system checks.  A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system. This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to the affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric.

Adobe ColdFusion 9.0, 9.0.1, 9.0.2, and 10, when a password is not configured, allows attackers to access restricted directories via unspecified vectors, as exploited in the wild in January 2013.

Improper access control in Windows SMB allows an authorized attacker to elevate privileges over a network.

The Metro Development Server, which is opened by the React Native Community CLI, binds to external interfaces by default. The server exposes an endpoint that is vulnerable to OS command injection. This allows unauthenticated network attackers to send a POST request to the server and run arbitrary executables. On Windows, the attackers can also execute arbitrary shell commands with fully controlled arguments.

Trivy is a security scanner. On March 19, 2026, a threat actor used compromised credentials to publish a malicious Trivy v0.69.4 release, force-push 76 of 77 version tags in `aquasecurity/trivy-action` to credential-stealing malware, and replace all 7 tags in `aquasecurity/setup-trivy` with malicious commits. This incident is a continuation of the supply chain attack that began in late February 2026. Following the initial disclosure on March 1, credential rotation was performed but was not atomic (not all credentials were revoked simultaneously). The attacker could have use a valid token to exfiltrate newly rotated secrets during the rotation window (which lasted a few days). This could have allowed the attacker to retain access and execute the March 19 attack. Affected components include the `aquasecurity/trivy` Go / Container image version 0.69.4, the `aquasecurity/trivy-action` GitHub Action versions 0.0.1 – 0.34.2 (76/77), and the`aquasecurity/setup-trivy` GitHub Action versions 0.2.0 – 0.2.6, prior to the recreation of 0.2.6 with a safe commit. Known safe versions include versions 0.69.2 and 0.69.3 of the Trivy binary, version 0.35.0 of trivy-action, and version 0.2.6 of setup-trivy. Additionally, take other mitigations to ensure the safety of secrets. If there is any possibility that a compromised version ran in one's environment, all secrets accessible to affected pipelines must be treated as exposed and rotated immediately. Check whether one's organization pulled or executed Trivy v0.69.4 from any source. Remove any affected artifacts immediately. Review all workflows using `aquasecurity/trivy-action` or `aquasecurity/setup-trivy`. Those who referenced a version tag rather than a full commit SHA should check workflow run logs from March 19–20, 2026 for signs of compromise. Look for repositories named `tpcp-docs` in one's GitHub organization. The presence of such a repository may indicate that the fallback exfiltration mechanism was triggered and secrets were successfully stolen. Pin GitHub Actions to full, immutable commit SHA hashes, don't use mutable version tags.

A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system. This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to an affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric. 

A logic flow weakness in Remote Access and Mobile Access certificate validation in deprecated IKEv1 key exchange allows an unauthenticated remote attacker to bypass user authentication and establish a remote access VPN connection without a valid user password.

Deserialization of untrusted data in Microsoft Office SharePoint allows an unauthorized attacker to execute code over a network.

Rockwell Automation MicroLogix 1400 PLC 1766-L32BWA, 1766-L32AWA, 1766-L32BXB, 1766-L32BWAA, 1766-L32AWAA, and 1766-L32BXBA devices have a hardcoded SNMP community, which makes it easier for remote attackers to load arbitrary firmware updates by leveraging knowledge of this community.

A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker with valid VPN user credentials could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as root, possibly resulting in the complete compromise of the affected device.

A vulnerability in the web-based management interface of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to execute arbitrary Java code as root on an affected device. This vulnerability is due to insecure deserialization of a user-supplied Java byte stream. An attacker could exploit this vulnerability by sending a crafted serialized Java object to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the device and elevate privileges to root. Note: If the FMC management interface does not have public internet access, the attack surface that is associated with this vulnerability is reduced.

Trimble Cityworks versions prior to 15.8.9 and Cityworks with office companion versions prior to 23.10 are vulnerable to a deserialization vulnerability. This could allow an authenticated user to perform a remote code execution attack against a customer’s Microsoft Internet Information Services (IIS) web server.

Rockwell Automation Studio 5000 Logix Designer Versions 21 and later, and RSLogix 5000 Versions 16 through 20 use a key to verify Logix controllers are communicating with Rockwell Automation CompactLogix 1768, 1769, 5370, 5380, 5480: ControlLogix 5550, 5560, 5570, 5580; DriveLogix 5560, 5730, 1794-L34; Compact GuardLogix 5370, 5380; GuardLogix 5570, 5580; SoftLogix 5800. Rockwell Automation Studio 5000 Logix Designer Versions 21 and later and RSLogix 5000: Versions 16 through 20 are vulnerable because an unauthenticated attacker could bypass this verification mechanism and authenticate with Rockwell Automation CompactLogix 1768, 1769, 5370, 5380, 5480: ControlLogix 5550, 5560, 5570, 5580; DriveLogix 5560, 5730, 1794-L34; Compact GuardLogix 5370, 5380; GuardLogix 5570, 5580; SoftLogix 5800.

Authentication bypass vulnerabilities in the GlobalProtect portal and gateway of Palo Alto Networks PAN-OS® software allows the attacker to bypass security restrictions and establish an unauthorized VPN connection. Panorama and Cloud NGFW are not impacted by these issues.

A vulnerability in Cisco Catalyst SD-WAN Software could allow an unauthenticated, remote attacker to view sensitive information on an affected system. This vulnerability is due to insufficient file system restrictions. An authenticated attacker with netadmin privileges could exploit this vulnerability by accessing the vshell of an affected system. A successful exploit could allow the attacker to read sensitive information on the underlying operating system.

An integer overflow was addressed with improved input validation. This issue is fixed in tvOS 15.2, macOS Monterey 12.1, Safari 15.2, iOS 15.2 and iPadOS 15.2, watchOS 8.3. Processing maliciously crafted web content may lead to arbitrary code execution.

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Updates Environment Management). Supported versions that are affected are 8.61 and 8.62. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in takeover of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).

Insufficient granularity of access control in Microsoft Defender allows an authorized attacker to elevate privileges locally.

A vulnerability in the API of Cisco Catalyst SD-WAN Manager could allow an authenticated, remote attacker to overwrite arbitrary files on the local file system. To exploit this vulnerability, the attacker must have valid read-only credentials with API access on the affected system. This vulnerability is due to improper file handling on the API interface of an affected system. An attacker could exploit this vulnerability by uploading a malicious file on the local file system. A successful exploit could allow the attacker to overwrite arbitrary files on the affected system and gain vmanage user privileges.

A vulnerability in the Data Collection Agent (DCA) feature of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to gain DCA user privileges on an affected system. This vulnerability is due to the presence of a credential file for the DCA user on an affected system. An attacker could exploit this vulnerability by sending a crafted HTTP request and reading the file that contains the DCA password from that affected system. A successful exploit could allow the attacker to access another affected system and gain DCA user privileges. Note: Cisco Catalyst SD-WAN Manager releases 20.18 and later are not affected by this vulnerability.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated but unprivileged (level 1), remote attacker to run privileged Cisco IOS commands by using the web UI. The vulnerability is due to a failure to validate and sanitize input in Web Services Management Agent (WSMA) functions. An attacker could exploit this vulnerability by submitting a malicious payload to the affected device's web UI. A successful exploit could allow the lower-privileged attacker to execute arbitrary commands with higher privileges on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

A vulnerability in the REST API for software device management in Cisco Application Policy Infrastructure Controller (APIC) Software could allow an authenticated, remote attacker to escalate privileges to root on an affected device. The vulnerability is due to incomplete validation and error checking for the file path when specific software is uploaded. An attacker could exploit this vulnerability by uploading malicious software using the REST API. A successful exploit could allow an attacker to escalate their privilege level to root. The attacker would need to have the administrator role on the device.

In MIT Kerberos 5 (aka krb5) 1.7 and later, an authenticated attacker can cause a KDC assertion failure by sending invalid S4U2Self or S4U2Proxy requests.

When a BIG-IP APM access policy is configured on a virtual server, specific malicious traffic can lead to Remote Code Execution (RCE).   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Inappropriate implementation in V8 in Google Chrome prior to 146.0.7680.75 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)

Yokogawa STARDOM Controllers FCJ, FCN-100, FCN-RTU, FCN-500, All versions R4.10 and prior, The web application improperly protects credentials which could allow an attacker to obtain credentials for remote access to controllers.

A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE), Cisco TelePresence Codec (TC), and Cisco RoomOS Software could allow an authenticated, remote attacker to escalate privileges to an unrestricted user of the restricted shell. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including specific arguments when opening an SSH connection to an affected device. A successful exploit could allow the attacker to gain unrestricted user access to the restricted shell of an affected device.

Moxa IKS and EDS generate a predictable cookie calculated with an MD5 hash, allowing an attacker to capture the administrator's password, which could lead to a full compromise of the device.

Cloud Foundry UAA release, versions prior to v64.0, and UAA, versions prior to 4.23.0, contains a validation error which allows for privilege escalation. A remote authenticated user may modify the url and content of a consent page to gain a token with arbitrary scopes that escalates their privileges.

A vulnerability in the Deterministic Random Bit Generator (DRBG), also known as Pseudorandom Number Generator (PRNG), used in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a cryptographic collision, enabling the attacker to discover the private key of an affected device. The vulnerability is due to insufficient entropy in the DRBG when generating cryptographic keys. An attacker could exploit this vulnerability by generating a large number of cryptographic keys on an affected device and looking for collisions with target devices. A successful exploit could allow the attacker to impersonate an affected target device or to decrypt traffic secured by an affected key that is sent to or from an affected target device.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to make unauthorized changes to the system configuration. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow a user with read-only privileges to change critical system configurations using administrator privileges.

Out of bounds write in Skia in Google Chrome prior to 146.0.7680.75 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)

A vulnerability in the web-based management interface of Cisco Unified Communications Manager could allow an authenticated, remote attacker to conduct SQL injection attacks on an affected system. The vulnerability exists because the web-based management interface improperly validates SQL values. An attacker could exploit this vulnerability by authenticating to the application and sending malicious requests to an affected system. A successful exploit could allow the attacker to modify values on or return values from the underlying database.

A use-after-free issue was addressed with improved memory management. This issue is fixed in iOS 17 and iPadOS 17, iOS 15.8.7 and iPadOS 15.8.7. An app may be able to execute arbitrary code with kernel privileges.

The tough library (Rust/crates.io) prior to version 0.7.1 does not properly verify the threshold of cryptographic signatures. It allows an attacker to duplicate a valid signature in order to circumvent TUF requiring a minimum threshold of unique signatures before the metadata is considered valid. A fix is available in version 0.7.1. CVE-2020-6174 is assigned to the same vulnerability in the TUF reference implementation.

Pivotal CredHub Service Broker, versions prior to 1.1.0, uses a guessable form of random number generation in creating service broker's UAA client. A remote malicious user may guess the client secret and obtain or modify credentials for users of the CredHub Service.

A vulnerability in the sponsor portal web interface for Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to impact the integrity of an affected system by executing arbitrary SQL queries. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted input that includes SQL statements to an affected system. A successful exploit could allow the attacker to modify entries in some database tables, affecting the integrity of the data. At the time of publication, this vulnerability affected Cisco ISE running software releases 2.6.0 and prior.

Cloud Foundry UAA, versions prior to 73.0.0, falls back to appending “unknown.org” to a user's email address when one is not provided and the user name does not contain an @ character. This domain is held by a private company, which leads to attack vectors including password recovery emails sent to a potentially fraudulent address. This would allow the attacker to gain complete control of the user's account.

Memory corruption while using alignments for memory allocation.

A vulnerability in the web management interface of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform an unauthorized system reset on an affected device. The vulnerability is due to improper authorization controls for a specific URL in the web management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could have a twofold impact: the attacker could either change the administrator password, gaining privileged access, or reset the network configuration details, causing a denial of service (DoS) condition. In both scenarios, manual intervention is required to restore normal operations.

A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities.

A vulnerability in the web-based management interface of Cisco Unified Communications Manager could allow an authenticated, remote attacker to view sensitive information in the web-based management interface of the affected software. The vulnerability is due to insufficient protection of user-supplied input by the web-based management interface of the affected service. An attacker could exploit this vulnerability by accessing the interface and viewing restricted portions of the software configuration. A successful exploit could allow the attacker to gain access to sensitive information or conduct further attacks.

VNX Control Station in Dell EMC VNX2 OE for File versions prior to 8.1.9.236 contains OS command injection vulnerability. Due to inadequate restriction configured in sudores, a local authenticated malicious user could potentially execute arbitrary OS commands as root by exploiting this vulnerability.

Cloud Foundry Bits Service, versions prior to 2.18.0, includes an information disclosure vulnerability. A remote malicious user may execute a timing attack to brute-force the signing key, allowing them complete read and write access to the the Bits Service storage.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(27), 8.1(1b), and 8.3(2). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(6). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(6). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), 8.2(3), and 8.3(2). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I4(9) and7.0(3)I7(6). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

Pivotal Operations Manager, versions 2.1 prior to 2.1.6 and 2.0 prior to 2.0.15 and 1.12 prior to 1.12.22, contains a static Linux Random Number Generator (LRNG) seed file embedded in the appliance image. An attacker with knowledge of the exact version and IaaS of a running OpsManager could get the contents of the corresponding seed from the published image and therefore infer the initial state of the LRNG.

In GLPI after version 0.83.3 and before version 9.4.6, the CSRF tokens are generated using an insecure algorithm. The implementation uses rand and uniqid and MD5 which does not provide secure values. This is fixed in version 9.4.6.

A vulnerability in the access-control logic of the NETCONF over Secure Shell (SSH) of Cisco IOS XR Software may allow connections despite an access control list (ACL) that is configured to deny access to the NETCONF over SSH of an affected device. The vulnerability is due to a missing check in the NETCONF over SSH access control list (ACL). An attacker could exploit this vulnerability by connecting to an affected device using NETCONF over SSH. A successful exploit could allow the attacker to connect to the device on the NETCONF port. Valid credentials are required to access the device. This vulnerability does not affect connections to the default SSH process on the device.

The Pivotal Ops Manager, 2.2.x versions prior to 2.2.23, 2.3.x versions prior to 2.3.16, 2.4.x versions prior to 2.4.11, and 2.5.x versions prior to 2.5.3, contain configuration that circumvents refresh token expiration. A remote authenticated user can gain access to a browser session that was supposed to have expired, and access Ops Manager resources.

An attacker could retrieve plain-text credentials stored in a XML file on PR100088 Modbus gateway versions prior to Release R02 (or Software Version 1.1.13166) through FTP.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Multiple vulnerabilities in Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, adjacent attacker to execute arbitrary code with elevated privileges. The vulnerabilities are due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit these vulnerabilities by authenticating to the web-based management interface and sending crafted requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges. Note: The web-based management interface is enabled by default.

Django Two-Factor Authentication before 1.12, stores the user's password in clear text in the user session (base64-encoded). The password is stored in the session when the user submits their username and password, and is removed once they complete authentication by entering a two-factor authentication code. This means that the password is stored in clear text in the session for an arbitrary amount of time, and potentially forever if the user begins the login process by entering their username and password and then leaves before entering their two-factor authentication code. The severity of this issue depends on which type of session storage you have configured: in the worst case, if you're using Django's default database session storage, then users' passwords are stored in clear text in your database. In the best case, if you're using Django's signed cookie session, then users' passwords are only stored in clear text within their browser's cookie store. In the common case of using Django's cache session store, the users' passwords are stored in clear text in whatever cache storage you have configured (typically Memcached or Redis). This has been fixed in 1.12. After upgrading, users should be sure to delete any clear text passwords that have been stored. For example, if you're using the database session backend, you'll likely want to delete any session record from the database and purge that data from any database backups or replicas. In addition, affected organizations who have suffered a database breach while using an affected version should inform their users that their clear text passwords have been compromised. All organizations should encourage users whose passwords were insecurely stored to change these passwords on any sites where they were used. As a workaround, wwitching Django's session storage to use signed cookies instead of the database or cache lessens the impact of this issue, but should not be done without a thorough understanding of the security tradeoffs of using signed cookies rather than a server-side session storage. There is no way to fully mitigate the issue without upgrading.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Stand are affected running software versions prior to 7.0(3)F3(5).

A vulnerability in the CLI of Cisco NX-OS Software and Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. Firepower 4100 Series Next-Generation Firewalls are affected running software versions prior to 2.2.2.91, 2.3.1.110, and 2.4.1.222. Firepower 9300 Security Appliance are affected running software versions prior to 2.2.2.91, 2.3.1.110, and 2.4.1.222. MDS 9000 Series Multilayer Switches are affected running software versions prior to 6.2(25) and 8.3(1). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(5). Nexus 3500 Platform Switches are affected running software versions prior to 7.0(3)I7(5). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected running software versions prior to 7.1(5)N1(1b) and 7.3(4)N1(1). Nexus 7000 and 7700 Series Switches are affected running software versions prior to 6.2(22), 7.3(3)D1(1), 8.2(3). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(5). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5).

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with valid administrator credentials to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient validation of user-supplied input at the CLI. An attacker could exploit this vulnerability by authenticating with the administrator password via the CLI of an affected device and submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute arbitrary commands on the device with root privileges.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to inject a command to the underlying operating system that will execute with root privileges upon the next reboot of the device. The authenticated user must have privileged EXEC permissions on the device. The vulnerability is due to insufficient protection of values passed to a script that executes during device startup. An attacker could exploit this vulnerability by writing values to a specific file. A successful exploit could allow the attacker to execute commands with root privileges each time the affected device is restarted.

A vulnerability in the search path processing of Cisco Directory Connector could allow an authenticated, local attacker to load a binary of their choosing. The vulnerability is due to uncontrolled search path elements. An attacker could exploit this vulnerability by placing a binary of their choosing earlier in the search path utilized by Cisco Directory Connector to locate and load required resources.

A vulnerability in Cisco SD-WAN Solution Software could allow an authenticated, local attacker to elevate privileges to Administrator on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain administrative privileges.

A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device.

The RSA Identity Governance and Lifecycle software and RSA Via Lifecycle and Governance products prior to 7.1.0 P08 contain an information exposure vulnerability. The Office 365 user password may get logged in a plain text format in the Office 365 connector debug log file. An authenticated malicious local user with access to the debug logs may obtain the exposed password to use in further attacks.

Multiple vulnerabilities in the initialization routines that are executed during bootup of Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers with a Route Switch Processor 3 (RSP3) installed could allow an authenticated, local attacker with high privileges to execute persistent code at bootup and break the chain of trust. These vulnerabilities are due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit these vulnerabilities by copying a specific file to the local file system of an affected device and defining specific ROMMON variables. A successful exploit could allow the attacker to run arbitrary code on the underlying operating system (OS) with root privileges. To exploit these vulnerabilities, an attacker would need to have access to the root shell on the device or have physical access to the device.

Multiple vulnerabilities in the initialization routines that are executed during bootup of Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers with a Route Switch Processor 3 (RSP3) installed could allow an authenticated, local attacker with high privileges to execute persistent code at bootup and break the chain of trust. These vulnerabilities are due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit these vulnerabilities by copying a specific file to the local file system of an affected device and defining specific ROMMON variables. A successful exploit could allow the attacker to run arbitrary code on the underlying operating system (OS) with root privileges. To exploit these vulnerabilities, an attacker would need to have access to the root shell on the device or have physical access to the device.

A vulnerability in the CLI parser of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, local attacker to access files from the flash: filesystem. The vulnerability is due to insufficient application of restrictions during the execution of a specific command. An attacker could exploit this vulnerability by using a specific command at the command line. A successful exploit could allow the attacker to obtain read-only access to files that are located on the flash: filesystem that otherwise might not have been accessible.

In freewvs before 0.1.1, a user could create a large file that freewvs will try to read, which will terminate a scan process. This has been patched in 0.1.1.

A vulnerability in the support tunnel feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access the shell of an affected device even though expert mode is disabled. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by enabling the support tunnel, setting a key, and deriving the tunnel password. A successful exploit could allow the attacker to run any system command with root access on an affected device.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to write values to the underlying memory of an affected device. The vulnerability is due to improper input validation and authorization of specific commands that a user can execute within the CLI. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a specific set of commands. A successful exploit could allow the attacker to modify the configuration of the device to cause it to be non-secure and abnormally functioning.

A vulnerability in the CLI implementation of a specific command of Cisco IOS XE Software could allow an authenticated, local attacker to overwrite arbitrary files in the underlying host file system. The vulnerability is due to insufficient validation of the parameters of a specific CLI command. An attacker could exploit this vulnerability by issuing that command with specific parameters. A successful exploit could allow the attacker to overwrite the content of any arbitrary file that resides on the underlying host file system.

Dell SupportAssist for Business PCs version 2.0 and Dell SupportAssist for Home PCs version 2.2, 2.2.1, 2.2.2, 2.2.3, 3.0, 3.0.1, 3.0.2, 3.1, 3.2, and 3.2.1 contain an Improper Privilege Management Vulnerability. A malicious local user can exploit this vulnerability by inheriting a system thread using a leaked thread handle to gain system privileges on the affected machine.

In writeToParcel and createFromParcel of RttManager.java, there is a permission bypass due to a write size mismatch. This could lead to a local escalation of privileges where the user can start an activity with system privileges, with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-70398564.